| DI Mixed Bed Water Resin Filter
DEMINERALIZATION WATER FILTER
TOP Quality Made In USA
- One and a half pounds of Deionization resin is enough to refill minimum 3 times in-line refillable filter housing 2"x10" or 2 times of the refillable 2.5"x10" filter housing that fits inside a standard 10" housing.
- 1 1/2 Lbs of DI resin is enough to process approximately 2000 gallons of Reverse Osmosis Water Quality.
- TDS meter is required to measure the life of the resin.
DI filter ( Mix Bed Resin ) named as de-ionization stage
Demineralization Resin used to produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm. Simply DI filter removes remaining of dissolved solids after RO system
|
_thumbnail.jpg&maxx=30&maxy=0 "Fitting - 1/4 tube O.D x 1/4 NPT Elbow")
_thumbnail.jpg&maxx=30&maxy=0 "6 STAGE RE-MINERALIZATION 50 GPD REVERSE OSMOSIS WATER SYSTEM")
_thumbnail.jpg&maxx=30&maxy=0 "Pleated Filter 1 Micron, size 10")
_thumbnail.jpg&maxx=30&maxy=0 "Spun Polypropylene Sediment Filter 5 Micron, size 20")
