180 GPD R.O. Membrane at 60 PSI
Model #:TW-2012-180
( FILMTEC MEMBRANE MATERIAL )
We Suggest to change your membrane every 2 year
FILMTEC reverse osmosis membrane elements for home drinking water are the industrys most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. FILMTEC elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed. Equipment suppliers can take advantage of FilmTecs Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems.
FILMTEC home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see the datasheet for more information).
REVERSE OSMOSIS MEMBRANE
(FILMTEC MEMBRANE MATERIAL)

|
Dimensions Inches (mm) |
|
Product |
A |
B |
C |
D |
E |
|
TW30-2012 |
11.74 (298) |
0.87 (22) |
0.68 (17) |
1.75 (44.5) |
10.0 (254) |
General Information
The first full tank of permeate should be discarded. Do not use this initial permeate for drinking water or food preparation.
Keep elements moist at all times after initial wetting.
If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
Made in Taiwan. The whole material is made by Filmtec (DOW Chemical Co.) in USA.