|
First Stage
5 Micron 10" X 2.5"
Pleated Filter

More surface area for greater
dirt holding capacity, Lower initial Pressure Drop Higher Flow Rate, Washable, Longer Life, Reduce filtration cost,
Removes 99 % of Solid particles from your water source before transferring the water to Second stage.
|
Second Stage
10"PP Spun
Sediment Filter
Removes smallest particles up to 5 micron such suspended solids and pathogenic bacteria & many others |
Third Stage
GAC 10" Coconut shell
Carbon Filters
Removes chlorine, taste &
odour using 100% coconut
Shell carbon.
|
( Large Size Housings for Standars filters 9.75 x 2.5" )
THIS WATER FILTER IS PERFECT FOR HOMES, APARTMENTS, COTTAGES, RV, SCHOOLS AND AQUARIUMS .
THIS UNIT ACCEPT STANDARD FILTERS 2.5" X 9.75"
Removes/Reduces:
Sediment, dirt, sand, silt, scale, rust particles, Pesticides, Bad tastes, Turbidity, Giardia Cysts, Chlorine, THMs, Odors, Herbicides, taste, chemicals& organic impurities.
Includes:
- 1 x Three Stages White Steel Mounting Bracket
- Set of 3 filters .
- 3 x BL Standard Filter housings 3/4" NPT with pressure release button. ( Large Size Housings for Standards filters 9.75 x 3" )
- 1 x Opening Spanner / Wrench
- 2 x reinforced heavy duty PVC ball valves (maintenance free & corrosion free) Includes Two Fittings 3/4 MIP x 3/4 MIP Connect Filter Housings.
- Installation instruction are included to DIY your own installation.
Specifications:
This system could start to generate the pure water at 20PSI.
Maximum working pressure: 125 PSI
Maximum Operating Temperature: 125F (52C)
Dimensions: H 15" x L 24 (with PVC Ball Valve) x W 6"
Weight: 17 lbs Approx
- Flow Rate / GPM
1 - 10* GPM for 3/4" Inlet / Outlet
* Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions.