|
For limited time
Order the following system and get one Single Inline TDS Meter SM-1 HM Digital worth $35.00 for FREE.
Note: This promotion cannot be used in the same order with our other free TDS ZT-2 promotion during the item pickup.
6 STAGE PROFISIONAL DE-MINERALIZE ( DI )
REVERSE OSMOSIS WATER FILTER SYSTEM
Drinking / Aquarium
75 Gallons Per Day
3 In 1 System
DRINKING / REEF & FRIDGE LINES
+
Upgraded DELUXE Faucet
Buy with Confident
We beat the competition every time
WHAT IS DE-MINERALIZE ( DI ) REVERSE OSMOSIS.
RO water purifications systems will reduce and eliminate TDS (total dissolved solids) like salts and minerals from our drinking water. However contrary to common beliefs, less than 1% of the organic minerals are actually found in most raw water supplies. With the increase of pollutants, our water supply contains mostly inorganic minerals. Inorganic minerals consist of calcium, iron, magnesium, carbonate and lime compounds, which are not compatible with our bodies. The bodys cells reject theses minerals leaving dissolved inorganic substances (acid crystals minerals deposits) throughout the body. This accumulation of debris creates more work and trouble for the body, such as arthritis in joints, gallstones, kidney stones and mineral deposits in artery walls. Organic minerals that are considered soluble, which means the body absorbs sustenance into the cells, are found in our live foods such as fruits & vegetables. One glass of freshly squeezed orange juice would be higher in minerals than 30 gallons of untreated raw water. Purified water provides a necessary rinsing treatment for hydration purposes as our body is mostly fluid (over 80% water) and equally important to rinse impurities out of our body.
Drinking purified water both prevents inorganic minerals from entering our bodies and removes inorganic mineral deposits already there.
Specifications:
Minimum rejection rate of 99.5 % of TDS
Product to Waste Ratio: 1:3L
Dimensions: 14.5" L x 6"D x 15.5 "H RO Unit; 11" x 14" Storage Tank
Storage tank: 3.2 gallon ( Storage capacity @ 60 PSI system pressure) /tank total volume 4.4
Gallon @ Maximum 100PSI Direct Feed.
Total Weight: Approx 27 lbs
Operation Temperature: 40F to 104F / Maximum temperature 40C.
System Operating Pressure: 45PSI to 75PSI.
- Lower than 45 PSI you must add booster pump + high pressure shut-off switch.
- Higher than 75 PSI Add pressure control valve to fix the pressure @ 60 to 65 PSI.
System only to be used on biologically safe water supply. Filter cartridges should be changed every 6 months under domestic conditions.
Detailed Description:-
All required fittings & instruction manuals are included to DIY your own installation.
Package Contents
- 1st Stage - 5 Micron Polypropylene Sediment Filter
To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water.
Replace every 6~12 months
- 2nd Stage -T33 GAC Coconut Shell Carbon Filter
Gives your water sweet taste & remove chlorine, pesticides, herbicides, bad taste & odours.
Replace every 6~12 months or lasts 3,000 gallons
- 3rd Stage Carbon Block Filter
It Takes 99% of the chlorine & organic chemicals also removes herbicides, pesticides, chlorine bi-products to protect membrane
Replacement each 6 months or lasts 3,000 gallons.
- 4th Stage - Fillit TFC Membrane 75 Gallons per day Model # TW-1812-75GPD
(FILMTEC MEMBRANE MATERIAL)
To remove particles down to 1/10,000 of a micron (which is 98% of impurities Including Organic and inorganic, chemicals). Replace every 2 years.
- 5th Stage - Inline T33 GAC Coconut Shell Carbon Filter
Polishing GAC Post filter for a sweeter taste for the water and removes any taste
or odour the water may have picked up while sitting in the tank.
Replace every 6 months or lasts 1,500 gallons
- 6th Stage DI filter ( Mix Bed Resin ) named as de-ionization stage
Demineralization Resin used to produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm. Simply DI filter removes remaining of dissolved solids after RO system
Replace every 6 months or lasts 1,500 gallons
- CE & NSF Certified durable 3.2 Gallons Tank Holding tank with Stainless Steel
connection system.
- Upgraded DELUXE Faucet : Long reach spout drinking faucet.
- Auto shut off valve
- Check Valve 1/4"ODx1/8"MIP
- Quality Calibrated 400ML Flow restrictor
- Tank Ball Valve 1/4" OD x 1/4" NPTF
- 10" standard Housing Wrench
- Feed Water Saddle Valve (Self Piercing Valve)
- Drain Clamp ( Drain saddle valve )
- 1/4 PE Tube: (10 meters/Length) 5 meters white & 5 meters blue
- T tube three way connection, to enable you connect your RO system directly to
your fridge
- Reverse Osmosis membrane flush kit & 400 ML Manual flash flow restrictor.
Passing fast & high speed flow of water over the membrane surface in order to clean off any remains or scale that would cause clogging and effects your membrane life.
- Inline Quick Fit Ball Valve
Enabling you to control (Close / Open) during filling your reef tank or any other container from your RO DI line.
- High Quality Vertical Hydraulic Gauge (40m/m) 10kg/cm2
indicate you to replace the filters when changes in reading start especially when pressure drop increase, that is an indication that the cartridges are clogging with particular maters or the filters media is exhausted and the water inside the system cant pass through the filters normally.
For your convenience, all installation parts are included in this package.
Warranty:-
One Year Limited Warranty |