| Build your own Home Drinking Reverse Osmosis system
Here are some guidelines on selecting the right RO accessories for you.
· Choose 5 μ micron + GAC + 1 μ pre-filter kit if your water supply contain lots of sediment in it
· Choose 5 μ + GAC + CTO carbon block if you have high chlorine or odor smell and other VOC’s (volatile organic compounds) in your water supply.
· Add inline mixed bed deionization filter to produce absolutely pure water with ZERO TDS.
· Single line TDS Meter: Measures water TDS from one line and insures that the unit is functioning properly and providing you the required level pure water for your needs.
· Dual TDS Meter: Measures water TDS from two lines and insures that the unit is functioning properly.
· Ball Valve: For manually turn your system on & off without turning your system on or shutting off the main line every time you end using your system.
· Pressure Gauge: To monitor the feed water pressure going into your membrane. Pressure will drop if pre filter get clogged and helps to know when to change them.
· Flush Kit: Used to flush your membrane manually to extend the membrane life and efficiency.
· Permeate Pump without pump: you either have to install the booster pump or permeate pump on the system, you can combine them both in the same system.
· Diverter valve: When you select this option; you can connect your RO Feed water Inlet to your kitchen faucet directly (suitable for those who lives in rental Apartments) or they don’t need to pierce their home pipe line.
· Two way diverter valve: When you select this option; the drain clamp will not be included in your package, we will connect the system drain line directly to the Diverter return line and all the waste will diverted to your sink through the diverter.
Specifications:
Minimum rejection rate of 95% - 98% of TDS
Product to Waste Ratio: 1:2.5 to 1:3 Litters
Dimensions: RO Unit - 15"L x 6"D x 17"H
Total Weight: Approx 16 lbs according to your selected futures.
Operation Temperature: 40F to 104F / Maximum temperature 40C.
System Operating Pressure: 45PSI to 75PSI.
- Lower than 45 PSI you must add booster pump + high pressure shut-off switch.
- Higher than 75 PSI Add pressure control valve to fix the pressure @ 60 to 65 PSI.
System only to be used on biologically safe water supply.
Filter cartridges should be changed every 6 -12 months under domestic conditions. Varies and depend on the water source quality.
Detailed Description
All required fittings & instruction manuals are included to DIY your own installation.
1 year limited warranty against manufacturing workmanship defects, no warranty on filter replacements.
Note: The First 5 options are required to complete the checkout.
RO water purifications systems will reduce and eliminate TDS (total dissolved solids) like salts and minerals from our drinking water. However contrary to common beliefs, less than 1% of the organic minerals are actually found in most raw water supplies. With the increase of pollutants, our water supply contains mostly inorganic minerals. Inorganic minerals consist of calcium, iron, magnesium, carbonate and lime compounds, which are not compatible with our bodies. The bodys cells reject theses minerals leaving dissolved inorganic substances (acid crystals minerals deposits) throughout the body. This accumulation of debris creates more work and trouble for the body, such as arthritis in joints, gallstones, kidney stones and mineral deposits in artery walls. Organic minerals that are considered soluble, which means the body absorbs sustenance into the cells, are found in our live foods such as fruits & vegetables. One glass of freshly squeezed orange juice would be higher in minerals than 30 gallons of untreated raw water. Purified water provides a necessary rinsing treatment for hydration purposes as our body is mostly fluid (over 80% water) and equally important to rinse impurities out of our body.
Drinking purified water both prevents inorganic minerals from entering our bodies and removes inorganic mineral deposits already there.
MAX WATER PRODUCT FEATURES:
|
|
1st Stage / 5 Micron Polypropylene Sediment Filter
To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles,dirt and cloudiness from water.
Replace every 6~12 months |
|
|
2nd Stage / T33 GAC Coconut Shell Carbon Filter
Gives your water sweet taste & remove chlorine, pesticides, herbicides, bad taste & odours.
Replace every 6~12 months or lasts 3,000 gallons |
|
|
3rd Stage
Either /
1 Micron Polypropylene Sediment Filter
To remove small particles & suspended matters and carbon fines may pass from second stage.
Replace every 6~12 months
OR /
CTO Carbon Block - Model# ST-CTO
To remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal.
Replace every 6~12 months
|
|
|
4th Stage / Fillit TFC Membrane - (FILMTEC MEMBRANE MATERIAL)
To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic and inorganic, chemicals).
Replace every 2 years.
|
|
.jpg&maxx=300&maxy=0)
|
5th Stage / Inline T33 GAC Coconut Shell Carbon Filter
Polishing GAC Post filter for a sweeter taste for the water and removes any taste or odour the water may have picked up while sitting in the tank.
Replace every 6~12 months or lasts 1,500 gallons
|
|
CE & NSF Certified durable Holding tank with Stainles Steel connection system.
|
|
|
|
|
|
Quality Calibrated Flow restrictor |
|
|
Auto Shut off valve
Automatically shuts off when tank pressure reaches 65% of incoming line pressure. Once tank fills 2/3 of RO water the valve will automatically shut down system. Save monthly over
1000 gallons of water and extend your water system membrane life. |
|
|
Drain Saddle Valve |
|
|
Check Valve 1/4"ODx1/8"MIP
|
|
|
Tank Ball Valve 1/4" OD x 1/4" NPTF |
|
|
1/4 PE Tube: (5 meters/Length) |
|
|
10 standard Housing Wrench
|
Normally 5 stage Reverse osmosis system can remove/ reduce the following list of contaminants.
There is no guarantee that the following list applies to any specific reverse osmosis systems or brands. If you are cautious about certain contaminants in your water, we urge you to taste your water after the reverse osmosis.
Neither NSF nor WQA can provide you with any certified detail list even if the System certified by them.
|
- Inorganic Organic Rejection
- Adrazin >98%
- Aldrin >98%
- Aluminum >98%
- Arsenic >98%
- Barium >95%
- Benzene >98%
- Bicarbonate >99%
- Cadmium >95%
- Calcium >98%
- Calcium Cloride >99%
- Chlorine >98%
- Chloride >95%
- Chlorinated Pesticides >99%
- Chloroform >98%
- Chromium VI >98%
- Copper >98%
- Copper Sulfate CuSO4 >99%
- Criptosporidium cysts >99%
- DDT >99.9%
- Dichloromethane >98%
- DOT > 98%
- E.coli bacteria >99.9% |
- Endrin >98%
- Fecal bacteria >99.9%
- Fluoranthene >98%
- Fluoride >95%
- Ferro cyanide >97%
- Giardia cysts >99%
- Glucose >98%
- Herbicides >98%
- Iron >98%
- Lead >98%
- Lindane >98%
- Magnesium >98%
- Magnesium Cloride >99%
- Manganese >98%
- Mercury II >85%
- Methoxychlor >98%
- Nickel >98
- Nickel Sulphate NiSO4 >99%
- Nitrate >90%
- PCB >98%
- Pesticides >98%
- Perchlorethylene >98%
- Phenol >98% |
- Potassium >95%
- Phosphate >95%
- Selenium IV >95%
- Silicate >95%
- Silica SiO2 >98%
- Silver >98%
- Salmonella typhi >99.9%
- Sodium >95%
- Sodium Chloride NaCl >99%
- Sodium Fluoride >99%
- Sodium Nitrate NaNO3 >97%
- Strontium >98%
- Sulphate >98%
- Tannic Acids >98%
- Toluane 99.9%
- Toxaphene >98%
- Trichloroethylene >98%
- Trihalomethanes >98%
- Total Dissolved Solids 95%
- Vibrio choleriae >99.8
- V.O.C.'s >98%
- Zinc >98% |
|
_thumbnail.jpg&maxx=30&maxy=0 "Fitting - 1/4 tube O.D x 1/4 NPT Elbow")
_thumbnail.jpg&maxx=30&maxy=0 "6 STAGE RE-MINERALIZATION 50 GPD REVERSE OSMOSIS WATER SYSTEM")
_thumbnail.jpg&maxx=30&maxy=0 "Pleated Filter 1 Micron, size 10")
_thumbnail.jpg&maxx=30&maxy=0 "Spun Polypropylene Sediment Filter 5 Micron, size 20")
