Removes 99.99% of smallest particles from your water source

removes suspended solids and pathogenic bacteria & many others 

Features:
1) Main ingredient: kieselguhr and inorganic antibacterial agent
2) Major traits:
    a) Light, high air hole ratio and a capacity less than 0.8g/cm,the air hole ratio is 1.3-1.5 times that of a general ceramic filter object. In the same conditions, its transmissibility is 1.5 - 3 times that of a general piece ceramic filter element
    b) Apertures are evenly laid with a high filter precision that reaches 0.1micron
    c) Status of self-cleaning is fine without any contamination in itself
    d) It is liable to regenerate, which allows rinsing with brushes, polished with sand paper and flushed with clear water or repeated washing. Removes harmful bacteria such as E. coli, Fecal Coliform, Salmonella, Streptococcus, and cysts (Cryptosporidium, Giardia). Reduces bad taste and odor, sediment, and asbestos. Cartridge is washable up to 30 times. The flow rate of the ceramic filter can be easily renewed by simply brushing its outer surface with a stiff toothbrush, plastic brush or soft scouring pad under running water. As the top layer of ceramic

and contaminants are brushed off, a new layer becomes available. Do not use soap, detergents or steel wool.

WHAT IS A FILTER CARTRIDGE? (B-B) 2.5"χ20"
A filter cartridge is a ceramic tube, which is cast open at both ends (OBE). Both ends are then closed off with food grade plastic mounts, which enable the cartridge to fit into a filter housing. The mount at the base of the tube is completely closed. The mount at the top of the tube has an opening through which filtered water flows after it has passed through the ceramic. Particles of dirt, bacteria etc. are trapped on the outside of the cartridge.

 

 

Features:
Ideal for RO guard and post filtration
Filtration efficiency of >99.99% at 0.8 to 0.3 micron

 

Specifications:

Dimensions: 2.5" D x 20" L

ID: 28mm

OD: 65mm

Length: 20inch

Operating Temp.: 4.4C -52C

Max. Operating Pressure: 100psi
Working temperature range: 5 - 38C
Working pH range: 5.5 - 9

 

 

 

Performance	Standard
Reduce harmful bacteria E.Coli, Cholera, Salmonella	> 99.90%
Removes Rust, Sediment & suspended Solids	> 99.90%
Turbidity reduction	> 99.90%
Absolute Filtration  ( to 0.90 Micron)	> 99.90%
Normal filtration       (to 0.80 0.30 Micron)	> 99.90%
Max. Flow rate: @ 3 BAR - for cold water use only	8 - 10 LPM
This ceramic water filter elements provides this following benefits
absolute Filtration to 0.05 micron
Removes algae, rust, sediment, suspended solids
Inhibits the growth and reduces the following harmful bacteria by rate better than 99.99% -           -  E.Coli -           -  Cholera -           -  Shigella -           -  Salmonella -           -  Klebsiella
Reduces Cryptosporidium by 99.999%
Reduces Giardia and other cysts by 99.999%
Removes Guinea worm
Reduce turbidity
Ideally suited for applications where mains pressure is low or gravity filter applications
Self sterilizing- does not require boiling