| Are you concerned about dirt, odour, colour, and bad taste in the cottage lake?
Get clean & clear water in your whole house faucets.
Perfect for Homes, Cottages & Offices.
Triple Stage 20"x 4.5" Big Blue Heavy Duty Iron / Manganese Whole House Filter 1"Ports
|
COMPLETE SET INCLUDES;
- 2 x Pressure Gauges
- 1 x 20" PP Spun 5 Micron Sediment Filter
- 1 x 20" Iron / Manganese filter
- 1 x 20" CTO Carbon Block Filter
- 1 x Stage 20" x 4.5" Clear Filter housings
- 2 x Stage 20" x 4.5" Big Blue Filter housings
- 1 x 3 Stages metal wall mounting bracket
- 2 x PC's 1" Reinforced heavy duty PVC ball valves
- 2 x 1" MIP Fittings + 2 installed between the three housings
- 1 x Filter Housing Wrench |
Usually we use Whole House Water Filter to deliver safer, cleaner, water to every faucet and showerhead in our whole house without drawing down water pressure.
Our Whole House Water Filter designed with oversized filters, housings to maintain the strongest water pressure as much as possible. Larger housings with larger filters require less frequent services, which saves your time, money, and efforts.
First Stage
PP Spun 5 Micron Sediment filter
Reduces sediment, dirt, sand, silt, scale & rust particles.
Removes 99 % of Solid particles from your water source before transferring the water to second stage.
Second Stage
Iron and Manganese water filter
Iron can be removed by many different methods to achieve the “World Drinking Standards”. These methods are regarded as old technology in world standards, expensive in Chemical and labour costs, Energy and ongoing costs and Maintenance costs.
Manganese however is much more difficult to remove and expensive using traditional methods.
The using media is the most sophisticated catalytic reaction media in the world and has a very high ability in removing iron and manganese, its also capable of removing other elements from a water supply given the correct conditions. This is the lowest cost method of removing Iron – Manganese from a water supply. All other processes are expensive to operate an difficult to maintain.
Thired Stage
Active Carbon Block ( CTO)
Reduces/ removes chlorine, taste, odors, chemicals, & organic impurities.
To remove small particles & carbon fines may pass from second stage & to ensure of chlorine removal.
Vertical Hydraulic Gauge
* The first pressure gauge read your feed water pressure (your city water,
well or cottage pump water pressure).
* The second gauge read unit internal pressure.
Both gauges indicate you to replace the filters when changes in reading start especially when pressure drop increase, that is an indication that the cartridges are clogging with particular maters or the filters media is exhausted and the water inside the system can’t pass through the filters normally.
Removes/Reduces:
- Sediment
- Pesticides
- Bad tastes
- Odors
- Giardia Cysts
- Chlorine
- Turbidity
- Herbicides
- VOC (volatile organic compounds)
- THMs
- MTBEs
Includes :-
- 1 x 20" x 4.5" Clear filter housing with pressure release 1" Ports.
- 1 x 20" x 4.5" Big Blue filter housing with pressure release 1" Ports.
3/4" Ports are available upon request.
- 2 x Liquid Pressure Gauges Size 60MM , Range 10 Kg/psi, Indicate your filter changes when the inlet & outlet water pressure readings are not equivalent.
- 1 X 5 Micron PP Spun sediment filter
- 1 X 5 Iron / Manganese water filter
- 1 X 20"x 4.5" CTO Activated Carbon Block Filter
- 2 x 1" Reinforced heavy duty PVC ball valves (maintenance free and corrosion free) + 4 x 1" couplings
- 1 x Filter Wrench
- 1 x three stages Metal Wall Mounting Bracket
- 1 Year Limited Manufacturer's Warranty
Specifications:
- Sediment Filter Life - 6 months.
- Carbon Filter Life - 20,000 Gallons
- Less than 1 psi pressure drop @ 20 GPM
- Maximum operating pressure: 125 PSI
- Operating temperature: 40-100oF (5°- 40°C)
- Dimensions: 27.5" height x 24.5" width x 8" depth
- Weight: Approx 42 lbs.
- Feed water pH range: 4.0 - 10.0
- Preferable feed water pressure range: 20 - 90 PSI to Get the best filtration results keep it less than 60 PSI.
- Maximum feed water TDS: 2000 ppm
- Flow Rate / GPM
1 - 40* GPM for 1" Inlet / Outlet
1 - 35* GPM for 3/4" Inlet / Outlet
* Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions.
Applications for products
- Electroplating, etching & image development process in PCB industry
- Filtration of electroplating fluid in conventional electroplating industry
- Pre-filter of DI & RO water filtration system for industry
- Filtration of low viscosity fluids of chemical
- Filtration of water for manufacturing processes & recycled water |
_thumbnail.jpg&maxx=30&maxy=0 "Pleated Filter 1 Micron, size 10")
_thumbnail.jpg&maxx=30&maxy=0 "Spun Polypropylene Sediment Filter 5 Micron, size 20")
