| Reverse Osmosis Pre Filter Replacement Set Without in-line Carbon Filter.
TOTAL 3 FILTERS - 1 OF EACH AS FOLLOWING:-
Ø 1 Pc Sediment Filter 1 micron Dirt/Rust 2.5" x 9 7/8"
Ø 1 Pc GAC Coconut shell carbon Filter 2.5" x 9 3/4"
Ø 1 Pc CTO Coconut Shell Carbon Block Filter 2.5" x 9 3/4"
- Carbon Cartridges are Coconut Shell Carbon Filter. Coconut carbon is a premium carbon that gives water a great sweeter taste.
Removes chlorine, taste and odour using Coconut Shell Carbon,
Fits all standard 10" X 2.5" Water Filter housings
|
1st Stage |
1 Micron Polypropylene Sediment Filter
To remove small particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water.
Replace every 6~12 months |
|
2nd Stage |
GAC T33 Coconut Shell Carbon Filter
Gives your water sweet taste & remove chlorine, pesticides, herbicides, bad taste & odours.
Replace every 6~12 months or lasts 3,000 gallons
|
|
3rd Stage |
CTO Coconut Shell Carbon Block Filter
To remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal.
Replace every 6~12 months or lasts 3,000 gallons. |
|
4th Stage |
Membrane - (This stage filter " membrane" is not Included in this package) |
|
5th Stage |
Inline GAC Coconut Shell Carbon Filter (This stage filter " membrane" is not Included in this package)
Polishing GAC Post filter for a sweeter taste for the water and removes any taste or odour the water may have picked up while sitting in the tank.
Replace every 6 months or lasts 1,500 gallons | |
_thumbnail.jpg&maxx=30&maxy=0 "Pleated Filter 1 Micron, size 10")
_thumbnail.jpg&maxx=30&maxy=0 "Spun Polypropylene Sediment Filter 5 Micron, size 20")
