11 RO/Aquarium Replacement Filters + 100 GPD membrane

11 RO/Aquarium Replacement Filters + 100 GPD membrane

Reverse Osmosis Replacement Filter Set with 100GPD RO Membrane

This kit is the universal replacement set for most of our Reverse Osmosis systems and contains three of the pre-filters, a 100 GPD RO membrane, and two inline polishing filters. We recommend replacing these pre/post filters every 6-12 months and the RO membrane every 2 years depending on incoming water quality and frequency of system use. This kit contains the following:

3x 10" Standard 5-micron Sediment Filter 104002

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt-holding capacity
• No surface binders to reduce flow and increase change-out frequency

3x 10" Standard Granular Activated Carbon (GAC) Filter 104004

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• 5 Micron nominal filter woven included preventing carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

3x 10" Standard Carbon Block (CTO) Filter 104005

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
• Remove small particles and carbon fines that may pass from the second stage & ensure 100% of chlorine removal from water.

2x Inline Granular Activated Carbon Filter 104041

• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100°F
• Inlet/Outlet: ¼" NPT

1x 100 GPD Reverse Osmosis Membrane 104094

• 100-gallon per Day Membrane for Reverse Osmosis systems, Fits all membrane sizes 1812-100
• 100 GPD R.O. Membrane at 60 PSI
• We Suggest changing your membrane every 2 years
• To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic, And chemicals).