11 Reverse Osmosis Water Filters + 50GPD membrane

Detailed Description:

Reverse Osmosis Replacement Filter Set with 50 GPD RO Membrane

This kit is the universal replacement set for most of our Reverse Osmosis systems and contains three of the pre-filters, a 50 GPD RO membrane, and two inline polishing filters. We recommend replacing these pre/post filters every 6-12 months and the RO membrane every 2 years depending on incoming water quality and frequency of system use. This kit contains the following:

3x 10" Standard 5-micron Sediment Filter 104002

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• No leach able or extractable to contaminate
• Long life and increased dirt-holding capacity
• No surface binders to reduce flow and increase change-out frequency

3x 10" Standard Granular Activated Carbon (GAC) Filter 104004

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste and odor, Sediment, Dirt, and THMS from water.
• 5 Micron filter woven is included to prevent carbon fines from passing from the filter to your water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

3x 10" Standard Carbon Block (CTO) Filter 104005

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
• Remove small particles and carbon fines that may pass from the second stage & ensure 100% chlorine removal from water.

1x 50 GPD Reverse Osmosis Membrane 104092

• 50 GPD R.O. Membrane at 60 PSI
• Model# 1812-50
• We Suggest changing your membrane every 2 years
• To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic, And chemicals).

2x Inline Granular Activated Carbon Filter 104041

• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100°F
• Inlet/Outlet: ¼" NPT