11 Stage RO System replacement Filter Set 5 in 1 Alkaline DI (w/o Membrane)

1x Sediment Filter 5 micron Dirt/Rust remover

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt holding capacity
• No surface binders to reduce flow and increase change-out frequency

1x GAC UDF 10” Coconut Shell Carbon Filter

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon
• 05 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

1x CTO Carbon Block Filter

• Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems.
• Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.

1x Standard Inline Carbon Cartridges

• Dimensions: 2 inch x 10 inch - Fits all Reverse Osmosis Systems.
• Filter Service Life 1500 Gallons (5676 Liter)
• Max Flow: 0.75 GPM
• Max Pressure: 125 PSI (8.6 Bar)
• Max Temperature: 100°F
• Inlet/Outlet: 1/4 inch NPT

1 x 5-in-1 pH+ Alkaline/Far Infrared/Remineralization Filter

1x Refillable Inline Mixed Bed Deionization Filter 

• Clear Housing, Refillable Cartridge 
• Filter Media: Mixed Bed ion exchange resin
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100°F
• Dimensions: 11 inch x 2 inch
• Inlet/Outlet: 1/4 inch FPT
• Weight: 13 oz

Total 6 filters, each individually wrapped