2-Stage 20"x4.5" Whole House Big Blue Heavy Duty Water Filtration System ¾" or 1" NPT Ports
NO filters are included with system. This system allows you to select your filters individually according to your requirements.
Are you concerned with the quality of the water at your cottage or lake house? Get clean and clear water for your whole house by removing dirt, discoloration, odors and bad taste with our 2-stage Whole House system, perfect for homes, cottages and offices.
Select one of the following options during your checkout:
- ¾" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Left to Right (Left Inlet - Right Outlet)
- ¾" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Right to Left (Right Inlet - Left Outlet)
- 1" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Left to Right (Left Inlet - Right Outlet)
- 1" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Right to Left (Right Inlet - Left Outlet)
The clear housing is on the Inlet Side, allowing you to inspect the sediment filter.
Note: Please make sure you have selected the correct option before checkout.
Our Whole House water filtration systems are designed to deliver safer, cleaner, water to every faucet and shower head in to the whole house without reducing down water pressure. By using oversized filter cartridges and housings this system to maintain the strongest water pressure possible. In addition these larger housings and filters require less frequent services, which saves you time, money, and effort.
Vertical Hydraulic Gauge
Having a pressure gauge is helpful in monitoring your incoming water pressure, internal unit pressure & when to replace the filters. It's best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter's media is exhausted as the water inside the system can’t pass through the filters normally.
Use the gauges on the system to check the following:
- The first pressure gauge to read your feed water pressure (city water, well or cottage pump water pressure) and the outgoing pressure from the first stage.
- The second gauge to read the second filter outgoing pressure.
- Sediment (silt, dirt, rust, ETC.)
- Bad Taste & Odors
- Giardia Cysts
- VOCs (Volatile Organic Compounds)
- THMs (Trihalomethanes)
- MTBEs (Methyl Tert-Butyl Ethers)
- 2 x 20"x 4.5" Clear Big Blue Single O-ring Filter Housing with Pressure Release Button
- 2 x 60MM Liquid Pressure Gauges (Range: 10 Kg/PSI)
- 1 x Heavy-duty PVC Ball Valve + 1 x Hex Nipple
- 1 x Filter Housing Wrench
- 1 x 2-stage Stainless Steel Wall Mounting Metal Bracket
- 1-year Manufacturer's Limited Warranty
- Sediment Filter Life: 6 months
- Carbon Filter Life Approx: 20,000-35,000 Gallons
- Pressure Drop @20GPM: Less than 1PSI
- Maximum operating pressure: 90PSI
- Operating temperature: 40-100°F (5- 40°C)
- Dimensions: 27.5" Height x 24.5" Width x 8" Depth
- Weight: Approx 40 lbs.
- Feed water pH range: 4.0-10.0
- Preferable feed water pressure range: 20-90PSI to get the best filtration results keeps it less than 60PSI.
- Maximum feed water TDS‡: 2000PPM
- Estimated Flow Rate:
- 1-40* GPM for 1" Inlet/Outlet
- 1-35* GPM for ¾" Inlet/Outlet
‡Total Dissolved Solids
*Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions.
- Electroplating, etching & image development process in PCB industry
- Filtration of electroplating fluid in conventional electroplating industry
- Pre-filter of DI & RO water filtration system for industry
- Filtration of low viscosity fluids of chemical
- Filtration of water for manufacturing processes & recycled water