Detailed Description:
2-Stage 20"x4.5" Whole House Big Blue Heavy Duty Water Filtration System 1" NPT Ports
NO filters are included with the system. This system allows you to select your filters individually according to your requirements.
1" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Right to Left (Right Inlet - Left Outlet)
Our Whole House water filtration systems are designed to deliver safer, cleaner, water to every faucet and shower head into the whole house without reducing water pressure. By using oversized filter cartridges and housings this system maintains the strongest water pressure possible. In addition, these larger housings and filters require less frequent services, which saves you time, money, and effort.
Vertical Hydraulic Gauge
Having a pressure gauge helps monitor your incoming water pressure, internal unit pressure & when to replace the filters. It's best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter's media is exhausted as the water inside the system can’t pass through the filters normally.
Use the gauges on the system to check the following:
- The first pressure gauge to read your feed water pressure (city water, well, or cottage pump water pressure) and the outgoing pressure from the first stage.
- The second gauge reads the second filter's outgoing pressure.
Removes/Reduces:
- Sediment (silt, dirt, rust, ETC.)
- Pesticides
- Bad Taste & Odors
- Giardia Cysts
- Chlorine
- Turbidity
- Herbicides
- VOCs (Volatile Organic Compounds)
- THMs (Trihalomethanes)
- MTBEs (Methyl Tert-Butyl Ethers)
Includes:
- 2 x 20"x 4.5" Clear Big Blue Single O-ring Filter Housing with Pressure Release Button
- 2 x 60MM Liquid Pressure Gauges (Range: 10 Kg/PSI)
- 1 x Heavy-duty PVC Ball Valve + 1 x Hex Nipple
- 1 x Filter Housing Wrench
- 1 x 2-stage Stainless Steel Wall Mounting Metal Bracket
- 1-year Manufacturer's Limited Warranty
Specifications:
- Sediment Filter Life: 6 months
- Carbon Filter Life Approx: 20,000-35,000 Gallons
- Pressure Drop @20GPM: Less than 1PSI
- Maximum operating pressure: 90PSI
- Operating temperature: 40-100°F (5- 40°C)
- Dimensions: 27.5" Height x 24.5" Width x 8" Depth
- Weight: Approx 40 lbs.
- Feed water pH range: 4.0-10.0
- Preferable feed water pressure range: 20-90PSI to get the best filtration results keeps it less than 60PSI.
- Maximum feed water TDS‡: 2000PPM
- Estimated Flow Rate:
- 1-40* GPM for 1" Inlet/Outlet
- 1-35* GPM for ¾" Inlet/Outlet
‡Total Dissolved Solids
*Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life, and conditions.
Applications:
- Electroplating, etching & image development process in the PCB industry
- Filtration of electroplating fluid in the conventional electroplating industry
- Pre-filter of DI & RO water filtration system for industry
- Filtration of low-viscosity fluids of chemical
- Filtration of water for manufacturing processes & recycled water
Filter Replacement Options and Alternatives for Item Number:103090
(1)
(2)
(6)
