200 GPD Booster Pump is designed for Membranes rated 200
200 GPD Reverse Osmosis Booster Pump
Improve the operating pressure and performance of your residential or light-commercial reverse osmosis system. Designed for reverse osmosis membranes rated up to 200 gallons per day, this pump is ideal for installations with low municipal water pressure, well-pressure systems, slow storage-tank filling, or continuous drain-water flow caused by insufficient feed pressure.
By supplying the RO membrane with the correct operating pressure, this 24V booster pump helps improve membrane efficiency, supports more consistent purified-water production, and reduces the time required to refill the RO storage tank.
Recommended for Low-Pressure Installations: This booster pump is recommended when incoming municipal water pressure is below approximately 50 PSI or when the system is supplied by a well-pressure tank operating around 40–60 PSI.
Consider This Booster Pump If:
- Your RO storage tank takes more than two hours to fill
- Your system continuously sends water to the drain
- Your incoming water pressure is below approximately 50 PSI
- Your RO membrane is not reaching its expected production capacity
- Your property uses a well-pressure tank with variable pressure
This Pump May Not Be Suitable If:
- Your city-water pressure is consistently 55 PSI or higher
- You only want to increase water flow to a refrigerator, ice maker, or RO faucet
Increasing delivery flow from a storage tank to a faucet, refrigerator, or ice maker normally requires a delivery pump or demand pump, which is a different product.
Key Features
- Designed for reverse osmosis membranes rated up to 200 GPD
- Suitable for residential and light-commercial RO applications
- Low-voltage 24V DC operation
- Transformer included
- Helps improve RO membrane operating pressure
- Supports faster storage-tank filling under low-pressure conditions
- Helps improve membrane efficiency and purified-water production
- Can be mounted in different positions to suit the installation
- Smooth, efficient operation under varying loads and ambient temperatures
- Pump duty cycle depends on feed pressure, system load, water temperature, and installation conditions
- Approximate weight: 4 lb.
- Approximate dimensions: 5 in. × 4 in. × 8 in.
Included Components
- Model 200 GPD reverse osmosis booster pump
- 24V DC transformer
- Two 1/4-inch tube OD × 3/8-inch MIP elbow fittings, Part No. 105327
Please verify the package configuration before ordering. A high-pressure switch, mounting bracket, T-connector, or other accessories are included only when specifically shown or selected as part of the package.
Specifications
| Specification | Details |
|---|---|
| Model / Item Number | 200 GPD |
| Nominal Flow Rate | 1.40 L/min. |
| Operating Pressure | 70–100 PSI |
| Electrical Rating | 24V DC, 2A |
| Recommended RO Membrane Capacity | Up to 200 GPD |
| Approximate Weight | 4 lb. |
| Approximate Dimensions | 5 in. × 4 in. × 8 in. |
Booster Pump Setup Guide
Review the installation guide before connecting the booster pump to your reverse osmosis system.
View the Booster Pump Setup Guide
Product Appearance Notice: Product labels, colours, fittings, housing styles, and minor visual details may vary according to supplier and production batch. All supplied units are intended to meet the advertised specifications and performance requirements.
Have a question? If you are unsure whether this 200 GPD booster pump is suitable for your RO system, contact us before ordering. Please provide your incoming water pressure and membrane capacity so we can help you choose the correct pump.
