Detailed Description:
Reverse Osmosis Replacement Filter Set with 50 GPD RO Membrane
This kit is the universal replacement set for most of our Reverse Osmosis systems, and contains three each of the pre-filters, a 50 GPD RO membrane and two inline polishing filters. We recommend replacing these pre/post filters every 6-12 months and the RO membrane every 2 years depending on incoming water quality and frequency of system use. This kit contains the following:
6 x 10" Standard 5-micron Sediment Filter 104002
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
- Meets FDA requirements for food and beverage contact
- No leach able or extractable to contaminate
- Long life and increased dirt holding capacity
- No surface binders to reduce flow and increase change-out frequency
6 x 10" Standard Granular Activated Carbon (GAC) Filter 104004
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
- 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your water.
- Operation Temperature: 40°F to 125°F
- Lower pressure drop
6 x 10" Standard Carbon Block (CTO) Filter 104005
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
- Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.
3 x Inline Granular Activated Carbon Filter 104041
- Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
- Max Flow: 0.5 GPM
- Max Pressure: 125 PSI
- Max Temperature: 100°F
- Inlet/Outlet: ¼" NPT
2 x 50 GPD NSF Certified Reverse Osmosis Membrane 104092
- 50 Gallon Per Day Membrane for Reverse Osmosis systems,
- Certified to NFS/ANSI 58 Standards
- 50 GPD R.O. Membrane at 60 PSI
- We Suggest to change your membrane every 2 years
- To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).
Recommended Filter Change Schedule
With our 2-year supply set we recommend you change out the the pre-filters (Sediment, GAC & CTO) every 8 months, the RO Membrane every 2 years, and the inline carbon filter once a year.Total 21 filters and 2 membrane, each individually wrapped.
Filters/Parts for Item Number:104516x6~104041x3~104092x2

Sale
Part Number: 104002
In Stock

Your Price: 18.00
Part Number: 104004
In Stock

Your Price: 15.00
Part Number: 104041
In Stock