300 gpd commercial reverse osmosis water system
Commercial 5 Stage 300 GPD Drinking Reverse Osmosis System
Specifications:
- Minimum rejection rate of 95% of TDS
- Operation Temperature: 40F to 104F / Maximum temperature 40C.
- Operating Pressure: 10 PSI to 75 PSI.
- The system is only to be used for biologically safe water supply.
- Filter cartridges should be changed every 2- 6 months.
- This is the whole house system, including extensive installation instructions pictures, etc.
Stages of Filtration:
- 1st Stage: 5-micron Sediment Filter 2.5'' x 20'' - Removes larger particles & suspended matter such as silt, rust, algae, sediment, particles, dirt, and cloudiness from water.
- Replacement each 2- 8 months 104081
- 2nd Stage: Pre-carbon GAC T33 Coconut Shell Carbon Filter 20"x2.5" filtration removes chlorine, pesticides, herbicides, bad taste & odor and gives your water a sweet taste
- Replacement each 2- 6 months 104084
- 3rd Stage: 3rd Stage CTO Carbon Block Filter 20"x2.5", removes chlorine taste, bad taste & odor
- Replacement each 2- 6 months 104083
- 4th Stage: 1 x membrane TFC 2412-300 GPD Commercial Reverse Osmosis Membrane, Removes particles down to 1/10,000 of a micron / (which is 98% of impurities including organic and inorganic, chemicals).
- Replacement every 2 years 104304
- 5th Stage: inline carbon - Polishing GAC Post Filter for a sweeter taste for the water and removes any taste or odor the water may have picked up while sitting in the tank.
- Replacement each 2- 8 months 104059
- Filter replacement part numbers: Membrane 104304, Pre-filter 104575, and Polishing Inline Filter 104059
Approx Replacement Each 2500 Gallon
Item Approx size: 17.5" (L) x 11" (W) x 33.5(H)"
System Weight Approx 50 Lbs - with packaging 53 Lbs
Includes:
- 1x Booster pumps, 3/8" PE Tube 10 feet, 1/4" Tube 16 feet, High-Pressure Switch, Low-pressure switch, Solenoid Valve, 1/2" Feed Water Adapter 105142
- 3/8" Feed Water Adapter Valve 105156
- 1/4"x1/4" RO Delivery Valve105120
- Wrench
- All filters and Membranes are included
Please Note: To prolong the lifespan of your multistage pump and reduce frequent on and off cycles, we recommend using this Liquid Level Control Switch #105050 Unlike basic electronic float valves, which can potentially damage your pump due to their design limitations, this switch offers reliable control and protection. Ensure optimal performance and longevity.
If your well water contains hydrogen sulfide (the source of a rotten egg odor), as well as elevated levels of iron, sulfur, or manganese, it should be properly treated before it reaches the reverse osmosis (RO) membrane. Without adequate pre-treatment, these contaminants can cause membrane fouling, slime formation, and buildup. This may occur when hydrogen sulfide oxidizes into sulfur particles or when sulfur-reducing bacteria are present in the water.
Additionally, RO membranes are not designed to effectively remove hydrogen sulfide odors. For this reason, we recommend installing an appropriate iron/sulfur filtration system ahead of the RO unit to protect the membranes and improve overall system performance.
This RO system is designed for feed water with a TDS level of up to 1,000 ppm. If your water exceeds this level or has high hardness, we strongly recommend installing a water softener and using an antiscalant system before the RO system. These pre-treatment measures help minimize scale buildup, improve system efficiency, and significantly extend the lifespan of the RO membranes.
TDS = Total Dissolved Solids.
Filter Replacement Options and Alternatives for Item Number:101122
(1)
(1)
