4 Stage Reverse Osmosis FULL Replacement Water Filter Kit with 50 GPD Membrane

4 Stage Reverse Osmosis FULL Replacement Water Filter Kit with 50 GPD Membrane

Reverse Osmosis Replacement Water Filter Set

This kit is the universal replacement set for most of our Reverse Osmosis systems, and contains one of each of the pre-filters as well as the inline polishing filter. We recommend replacing these filters every 6-12 months depending on incoming water quality and frequency of system use. This kit contains the following:

1x 10" Standard 5-micron Sediment Filter 104002

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt holding capacity
• No surface binders to reduce flow and increase change-out frequency

1x 10" Standard Granular Activated Carbon (GAC) Filter 104004

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

1x 50 GPD Reverse Osmosis Membrane 104092

• 50 GPD R.O. Membrane at 60 PSI
• Model# 1812-50
• We Suggest to change your membrane every 2 years
• To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).

1x Inline Granular Activated Carbon Filter 104041

• Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt
• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100°F
• Inlet/Outlet: ¼" NPT