5 Stage 100 gpd Reef Aquarium RO/DI Reverse Osmosis System + Float Valve (optional)

Description
Specifications

Parts and Diagram

Customer Reviews

This system is ideal for all beginners and midrange levels of reef aquarium owners and some professionals. You can get an absolute 99.99 pure water with 00 PPM, you can also add a side reservoir tank and control the auto-filling and shutting off the system by using the float valve 105369

You can produce up to 700 gallons of RODI if you offer good maintenance to your RO system and refill the DI filter on time when starts shrinking during use. DI resin should be always intact to prevent the cation and anion resins get apart, once they get apart the filter fails and you should change the media.

for more information about the filter, life check 104050

Remember always bypass the DI filter stage when you make flushing to your RO system during filter setup of filter changes.

Detailed Description:

5-Stage Saltwater Aquarium RODI Unit with Float Valve

Producing 99.99% pure water, this is a great system if you are looking for a reverse osmosis unit for your saltwater aquarium or hydroponics setup. Included float valve shuts off the system when your tank is full.

Please Note: For higher capacity configurations (150 GPD or more) we highly recommend adding a booster pump to achieve maximum output from the system.

Tank and faucet are not included with this system

Stages of Filtration:

1^st Stage: 1 Micron Polypropylene Sediment Filter 104001
2^nd Stage: Granular Activated Carbon (GAC) Filter 104004
3^rd Stage: 5 Micron Carbon Block (CTO) Filter 104005
4^th Stage: Stage: TFC 50GPD RO Membrane 104092
5^th Stage: Refillable Inline Mixed Bed DI Filter 104050

Note: Our Refillable DI Cartridges can be refilled with our bulk DI resin (part #104135-5)

Reduces:

Bad Tastes and Odors
Lead
Flouride
Chlorine
Copper
Cysts (Cryptosporidium, Giardia, Entamoeba & Toxoplasma)

Includes:

5-stage RO/DI Unit
Selected RO Membrane (Price may vary)
One set of installed pre-filters
Housing wrench and installation accessory pack
Optional Booster Pump if selected (Price may vary)
Float Valve Part #105369

Specifications

The rejection rate of 99.99% of TDS‡ after the DI Stage
Product Water:
- 0 ppm TDS
- Conductivity <0.1uS/cm
- Resistivity approx. 18 MO
Product to Waste Ratio: 1:2
Physical Dimensions:
- RO Unit: 15" L x 6" D x 17" H;
Total Weight: Approx. 27 lbs
Operation Temperature: 40-104°F / Maximum temperature 40°C.
System Operating Pressure: 45-75PSI.

Lower than 45 PSI you must add a booster pump + high-pressure shut-off switch.

Higher than 75 PSI Add pressure control valve to fix the pressure @60-65PSI.

Warning: This system should only be used with a biologically safe water supply.

Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.

‡ Total Dissolved Solids

standard-system-slide03-installation-clear

Hobbyist

We purchased this 5 stage 75 gpd reef aquarium r/o system. The entire system has run flawlessly. The resulting filtered water is purer (lower tds) and produces more than our previous "on demand" Merlin r/o system. We also purchased the low & high pressure switches as well as a booster pump. We are very pleased with the equipment as well as the timely fashion in which everything was delivered. Thank you Maxwaterflow ! Sincerely Richard

Reviewed by: Richard De Launas from Lanark Ontario Canada. on 12/24/2010

Aquarium RODI

Great product, great price! Have had mine installed for three years now with no issues. I didn't buy the pressure tank with the package initially but added it shortly after. I HIGHLY recommended purchasing the pressure tank with the RODI system. Very satisfied with the product quality, pricing and ease of getting and replacing the filter elements. The float has worked flawlessly for the entire time as well. Don't even bother searching for a better deal, it's right here!

Reviewed by: Nicholas Carver from USA. on 9/3/2016