If you own a 50 GPD 5-stage RO System this filter set replaces all the pre filters, membrane and the post carbon filter. If you think your membrane is still good and don't need to change it yet, check out our 10” Standard Reverse Osmosis Replacement Filter Set.
If you have additional Stages, this pack has most of what you need and check out our Inline Filters category to find replacement filters for your setup.
Detailed Description:
Reverse Osmosis Replacement Filter Set with 50GPD RO Membrane
This kit is the universal replacement set for most of our Reverse Osmosis systems and contains one of each of the pre-filters, a 50 GPD RO membrane, and an inline polishing filter. We recommend replacing these pre/post filters every 6-12 months and the RO membrane every 2 years depending on incoming water quality and frequency of system use. This kit contains the following:
4x 10" Standard 5-micron Sediment Filter 104002
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
- No leachable or extractable to contaminate
- Long life and increased dirt-holding capacity
- No surface binders to reduce flow and increase change-out frequency
4x 10" Standard Granular Activated Carbon (GAC) Filter 104004
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
- 5 Micron nominal filter woven included preventing carbon fines from passing from the filter to your drinking water.
- Operation Temperature: 40°F to 125°F
- Lower pressure drop
4x 10" Standard Carbon Block (CTO) Filter 104005
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
- Remove small particles and carbon fines that may pass from the second stage & ensure 100% of chlorine removal from water.
1x 50 GPD Reverse Osmosis Membrane 104092
- 50 GPD R.O. Membrane at 60 PSI
- Model# 1812-50
- We Suggest changing your membrane every 2 years
- To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic, And chemicals).
3x Inline Granular Activated Carbon Filter 104041
- Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
- Max Flow: 0.5 GPM
- Max Pressure: 125 PSI
- Max Temperature: 100°F
- Inlet/Outlet: ¼" NPT
Total 16 filters and 1 membrane, each individually wrapped.