6 Stage Reverse Osmosis RO.DI Water Filter Replacement Kit 100 GPD Membrane

6 Stage Reverse Osmosis RO.DI Water Filter Replacement Kit 100 GPD Membrane

1 set of replacement filters with following :

1 x Sediment Filter 5-micron Dirt/Rust remover

• Size 9 7/8" x 2.5" - Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact.
• No leachable or extractable material to contaminate outflowing water.
• Long life and increased dirt holding capacity.
• No surface binders to reduce flow and increase change-out frequency.

1 x GAC 10" Coconut shell Carbon Filter

• Size 9 7/8" x 2.5" - Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon.
• 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F

1x CTO Carbon Block Filter

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove small particles and cabon fines may pass from second stage& to ensure 100% of chlorine removal from water.

1 x Standard Inline Carbon Cartridges