Max Water 800 GPD Commercial Reverse Osmosis Water Filtration System
Commercial 5 Stage 800 GPD Drinking Reverse Osmosis System
Specifications:
- Minimum rejection rate of 95% of TDS
- Operation Temperature: 40F to 104F / Maximum temperature 40C.
- Operating Pressure: 10 PSI to 75 PSI.
- The system is only to be used for biologically safe water supply.
- Filter cartridges should be changed every 2- 6 months.
- This is the whole house system, including extensive installation instructions pictures, etc.
Stages of Filtration:
- 1st Stage: 5-micron sediment filter 2.5'' x 20'' - Removes larger particles & suspended matter such as silt, rust, algae, sediment, particles, dirt, and cloudiness from water. (Replacement each 2- 8 months)
- 2nd Stage: Pre-carbon filtration removes chlorine, pesticides, herbicides, bad taste & odor Gac T33 Coconut shell carbon filter 2.5 inch x 20 inch gives your water a sweet taste (Replacement each 2- 6 months)
- 3rd Stage: 3rd Stage CTO coconut shell filter 2.5inch x 20 inch , removes chlorine taste, bad taste & odor (Replacement each 2- 6 months)
- 4th Stage: 4 x membrane TFC 2012-200 GPD, Removes particles down to 1/10,000 of a micron / (which is 98% of impurities including organic and inorganic, chemicals). (Replacement every 2 years.)
- 5th Stage: inline carbon - Polishing Gac post filter for a sweeter taste for the water and removes any taste or odor the water may have picked up while sitting in the tank.
Approx Replacement Each 2500 Gallon
Item Approx size: 17.5" (L) x 11" (W) x 33.5(H)"
System Weight Approx 57 Lbs - with packaging 58 Lbs
Includes:
- Double end Booster pump, 3/8" PE Tube 10 feet, 1/4" Tube 16 feet, High-Pressure Switch, Low-pressure switch, Solenoid Valve, 1/2" Feed Water Adapter 105142
- 3/8" Feed Water Adapter Valve 105156
- 1/4"x1/4" RO Delivery Valve105120
- Wrench
- All filters and Membranes are included
If your well water contains hydrogen sulfide (the source of a rotten egg odor), as well as elevated levels of iron, sulfur, or manganese, it should be properly treated before it reaches the reverse osmosis (RO) membrane. Without adequate pre-treatment, these contaminants can cause membrane fouling, slime formation, and buildup. This may occur when hydrogen sulfide oxidizes into sulfur particles or when sulfur-reducing bacteria are present in the water.
Additionally, RO membranes are not designed to effectively remove hydrogen sulfide odors. For this reason, we recommend installing an appropriate iron/sulfur filtration system ahead of the RO unit to protect the membranes and improve overall system performance.
This RO system is designed for feed water with a TDS level of up to 1,000 ppm. If your water exceeds this level or has high hardness, we strongly recommend installing a water softener and using an antiscalant system before the RO system. These pre-treatment measures help minimize scale buildup, improve system efficiency, and significantly extend the lifespan of the RO membranes.
TDS = Total Dissolved Solids.
Filter Replacement Options and Alternatives for Item Number:101129
(1)
