The AEV is a complete, all-in-one design, consisted of pump, motor, pressure tank, and CPU controller.
The pump is constructed from top quality and non-rust material, to ensure clean and no rusty using water issue.
When water outage occurs, the pump will auto shut off in 30 seconds. CPU will auto sense the pump water status and restart the pump in 30 minutes until normal water returns.
Quiet operation without noise, to uplift living standard.
Always keep stable water pressure while using water or hot water shower.
Working Conditions
Ambient Temp.: 0~40C.
Relative Humidity: Max.85%(RH).
Liquid Temp.: 2~40C.
Working Pressure: Max. 5 kg/cm2.
Before using the pump, be sure the inlet pressure setting is lower than factory preset activation pressure.
Clean/fresh water or other clean non-corrosive liquids without abrasives.
No transfer underground water or over 50C hot water.
Specifications
POWER: 1/4HP;1/2HP; 1HP
Motor Protection: IP54
Motor Insultation: B
Voltage: 1 phase 110/220V*60HZ ; 220~240V*50HZ (No 3 phase)