2 x Sediment Filter 1-micron Dirt/Rust remover 104001
Size 9 7/8" x 2.5" - Fits most standard 10" size housings and most reverse osmosis systems.
Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
Meets FDA requirements for food and beverage contact.
No leachable or extractable material to contaminate outflowing water.
Long life and increased dirt holding capacity.
No surface binders to reduce flow and increase change-out frequency.
2 x GAC 10" Coconut shell Carbon Filter
Size 9 7/8" x 2.5" - Fits most standard 10" size housings and most reverse osmosis systems.
Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon.
1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
Operation Temperature: 40°F to 125°F
2 x CTO Carbon Block Filter
Size 9 7/8" x 2.5" Fits most standard 10" size housings and most reverse osmosis systems.
Remove small particles and carbon fines may pass from the second stage & ensure 100% of chlorine removal from water.
1 x DI resin bag (1-1/2 Lbs mixed bed deionization resin) 104138-2
2 Lbs of DI resin is enough to refill 3-4 times inline refillable MAX WATER larger sized filter housing 2x11".
2 Lbs of DI resin is enough to process approximately 1600 to 2000 gallons of DI water from any Reverse Osmosis Water Quality.
TDS meter is required to measure the life of the resin.
Demineralization Resin used to produce 99.99% pure water by simply attaching this convenient deionization filter with the RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm. Simply DI filter removes the remaining dissolved solids after the RO system.
This resin bag is for Aquarium. For Food Grade DI Resin, search for Part # 104135.
1 x Standard Inline Carbon Cartridges
Dimensions: 2" x 10" - Fits standard Reverse Osmosis Systems - 10 Micron Nominal
Removes Chlorine, Bad Taste & Odor, Turbidity, Sediment, THMs, and Dirt.
Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
Max Flow: 0.5 GPM
Max Pressure: 125 PSI
Max Temperature: 100°F
Inlet/Outlet: 1/4" NPTF thread (fitting is required)
Total 8 filters, each individually wrapped.
Filters/Parts for Item Number:104515x2~104138~104041