BW 4040 HF 2400 GPD Brackish Water RO Membrane Element , Commercial Reverse Osmosis RO

BW 4040 HF 2400 GPD Brackish Water RO Membrane Element , Commercial Reverse Osmosis RO

Max Water BW 4040 HF 2400 GPD Commercial RO Membrane

• Reverse Osmosis membrane elements for commercial drinking water systems are the industry's most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our Reverse Osmosis membranes are shipped dry for convenient handling and long shelf-life. Our ISO9001-rated membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi.

• BW-4040 HF standard flow is 2400 GPD @ 225 PSI Now, if you reduce pressure to city water to 80 to 100 PSI, the pressure is reduced; therefore, permeate flow will be approximately 850 to 1066 GPD according to the incoming low pressure you apply

We suggest changing your membrane every 2 years

Specifications

• 2400 Gallon Per Day Membrane for Commercial Reverse Osmosis systems.
• Certified to ISO 9001 Standards
• Removes particles down to 1/10,000th of a micron (removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC.).

TDS = Total Dissolved Solids.

Membrane Features

• Provides stable, high rejection of contaminates even with high TDS water sources.
• Advanced membrane technology with innovative thin-layer composite membrane design.
• More consistent performance with less fouling requiring less frequent cleaning and changeouts.
• 100% dry-stored membrane maximizing shelf life.
• Best-in-Class Membrane Quality – Engineered with 90 ft² (8.36 m²) active membrane area to deliver maximum output, durability, and long-lasting filtration performance.
  

General Information

• The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products.
• Keep membrane moist at all times after initial wetting.
• To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
• The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
• If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.