BWE4040 Brackish Water Membrane 4"X 40" Replace DOW BW30-4040 & CSM RE4040-BE

Price

CAD $360.00

CAD $225.00

(Saving:38%)

Part Number: 104341

Availability:

Out of stock

Send to:

or add name:

*We'll ask for shipping info at checkout

Description
Customer Reviews

Detailed Description:

HYDRAMEM HM, BWE 4040 - High Performance Brackish Water RO Element

Reverse Osmosis membrane elements for commercial drinking water systems are the industry's most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our Reverse Osmosis membranes are shipped dry for convenient handling and long shelf-life. Our membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi.

HM-4040-BWE standard flow is 2600 GPD @ 150 PSI ,Now if you the reduce pressure to 60 PSI,pressure reduced 40% ,therefore permeate flow will be approximately 1120 GPD

We suggest changing your membrane every 2 years

Specifications

2600 Gallon Per Day Membrane for Commercial Reverse Osmosis systems.
Removes particles down to 1/10,000th of a micron (removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC.).

Membrane Features

Provides stable, high rejection of contaminates even with high TDS water sources.
Advanced membrane technology with innovative thin layer composite membrane design.
More consistent performance with less fouling requiring less frequent cleaning and change outs.
100% dry-stored membrane maximizing shelf life.

General Information

The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products.
Keep membrane moist at all times after initial wetting.
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.

Usage

It is applicable to the desalination of municipal water, groundwater with salt concentration less than 1000ppm. It can be widely used in pure water preparation and related industries.

Specifications & Parameters

Model	Active Membrane Area ft²(m²)	Permeate Flow GPD(T/D)	Stable Rejection Rate (%)
HM-4040-BWE	85(7.9)	2600	99.3

Standard Test Condition

Concentration of Solution (NaCl)	Temperature(?)	pH Value >	Operating Pressure psi(MPa)	Recovery Rate(%)
1500ppm	25	6.5-7	225 PSI	15

Notes: The permeate flow of single membrane element may vary with in ±15%.

Operating Limits and Conditions of Membrane Element:

Max.Working Pressure	600 psi(42.18KG/CM2)
Max. FeedWater Temperature	45 ?
Feed Water Chlorine Concentration	<0.1 ppm
Feed Water pH Range, Continuous Operation	2-11
Feed Water pH Range, Chemical Cleaning	1-13
Maximum Feed Water SDI (15 Minute Test)	SI <= 5
Maximum Feed Turbidity	NTU 1.0
Max. Pressure Drop of Single Membrane Element	15psi(0.1Mpa)

INDUSTRIAL

Commonly referred to as: Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy

4" x 40" Fits nearly all standard 4" x 40" Membrane housings stainless steel, PVC, or Fiberglass

This is compatible with the following common Brands and part numbers as well as others:

Dow Filmtec 4040 - Low pressure lines XLP, XLE
Vontron ULP-4040
CSM 4040
Hydranautics
Axeon HF4 and HF5 Series

Operating Information

1. For the recommended Design Range, Please consult the latest HYDRAMEM technical bulletin, design guidelines or call an application specialist. if the operating limits given in this product information bulletin are not strictly followed, the limited warranty will be null and void
2. Fllow instructions mentioned on the caution sticker placed on product packaging.
3. The customer is fully responsible for the effects of chemicals that are incompatible with the elements.
4. For element loading, use only the recommended silicon lubricant. The use of petroleum based lubricant or vegetable based oils may damage the element irreveersibly.
5. Membranes shows some resistance to short-term attack by chlorine (Hypochlorite). Continuous exposure should be avoided as it my damage the membrane.