3-Stage 20"x4.5" Big Blue Water Filtration System with ¾" or 1" NPT Ports
Are you concerned with the quality of the water at your City Water? Get clean and clear water for your whole house by removing dirt, Chlorine, odors with our 3-stage Whole House system, perfect for homes, cottages, and offices.
Select one of the following options during your checkout:
- ¾" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Right to Left (Right Inlet - Left Outlet)
- 1" Ports (Inlet/Outlet Sizes): Flow Setup Direction is Right to Left (Right Inlet - Left Outlet)
The clear housing is on the Inlet Side, allowing you to inspect the sediment filter.
Note: Please make sure you have selected the correct option before checkout.
Our Whole House water filtration systems are designed to deliver safer, cleaner, water to every faucet and shower head into the whole house without reducing down water pressure. By using oversized filter cartridges and housings this system maintains the strongest water pressure possible. In addition, these larger housings and filters require less frequent services, which saves you time, money, and effort.
Pre-loaded Filter Cartridges:
- 1st Stage: 5 Micron Polypropylene Sediment Filter 104112
- 2nd Stage: Granulated Activated Carbon Filter (GAC) 104113
- 3rd Stage: Carbon Block Filter (CTO) 104114
Vertical Hydraulic Gauge
Having a pressure gauge is helpful in monitoring your incoming water pressure, internal unit pressure & when to replace the filters. It's best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter's media is exhausted as the water inside the system can’t pass through the filters normally.
- Sediment (silt, dirt, rust, ETC.)
- Bad Taste & Odors
- Giardia Cysts
- VOCs (Volatile Organic Compounds)
- THMs (Trihalomethanes)
- MTBEs (Methyl Tert-Butyl Ethers)
- 1 x 20" x 4.5" Clear Big Blue Double O-ring Filter Housing with Pressure Release Button
- 2 x 20" x 4.5" Blue Big Blue Double O-ring Filter Housing with Pressure Release Button
- 2 x 60MM Liquid Pressure Gauges (Range: 10 Kg/PSI)
- 1 x 5-micron PP Sediment Filter.
- 1 x Coconut Shell Granulated Activated Carbon Filter (GAC)
- 1 x Coconut Shell Carbon Block Filter (CTO)
- 1 x Heavy-duty PVC Ball Valve + 1 x Hex nipple
- 1 x Filter Housing Wrench
- 1 x 3-stage Wall Mounting Metal Bracket
- 1-year Manufacturer's Limited Warranty
- Sediment Filter Life: 6 months
- Carbon Filter Life: Approx 20,000 - 35,000 Gallons
- Pressure Drop @20GPM: Less than 1PSI
- Maximum Operating Pressure: 90PSI
- Operating Temperature Range: 40-100°F (5- 40°C)
- Dimensions: 27.5" Height x 24.5" Width x 8" Depth
- Weight: Approx 42 lbs.
- Feed water pH range: 4.0-10.0
- Preferable feed water pressure range: 20-90PSI to get the best filtration results keeps it less than 60PSI.
- Maximum feed water TDS‡: 2000 PPM
- Estimated Flow Rate:
- 1-40* GPM for 1" Inlet/Outlet
- 1-35* GPM for ¾" Inlet/Outlet
‡Total Dissolved Solids
*Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions.
- Electroplating, etching & image development process in the PCB industry
- Filtration of electroplating fluid in the conventional electroplating industry
- Pre-filter of DI & RO water filtration system for industry
- Filtration of low viscosity fluids of chemical
- Filtration of water for manufacturing processes & recycled water