Ceramic water filter set, pleated sediment & udf carbon gac

Ceramic water filter set, pleated sediment & udf carbon gac

Part Number: 104522
In Stock
*We'll ask for shipping info at checkout
Quantity Pricing
  • 6+
  • C$40.50

Reverse Osmosis Pre Filter Replacement set.

1 x Pleated Sediment Filter 5 micron Dirt/Rust remover

  • Pleated Sediment Filter 5 micron / /Polypropylene Material
  • Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
  • Used to Remove small particles & suspended matter such as silt, rust, sand,  algae, sediment, scale particles from water.
  • Meets FDA requirements for food and beverage contact
  • Washable filter / minimize the filtration cost
  • Operation Temperature: 40°F to 140°F
  • No surface area, lower pressure drop
  • All filters are individually wrapped 

1 x UDF GAC 10" Coconut shell Carbon Filter // Size 2.5" x 9 7/8" Fits most standard

  • 10" size housings and most reverse osmosis systems.
  • Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
  • Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon 
  • 05 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
  • Operation Temperature: 40°F to 125°F
  • Lower pressure drop
  • All filters are individually wrapped

1 x DOC 10" Ceramic Filter 0.8 - 0.3 Micron Size 2.5" x 10" fits all standard 10" filter housings .

Removes 99.99% of smallest particles from your water sourceremoves suspended solids and pathogenic bacteria & many others Features:

1) Main ingredient: kieselguhr and inorganic antibacterial agent

2) Major traits: a) Light, high air hole ratio and a capacity less than 0.8g/cm,the air hole ratio is 1.3-1.5 times that of a general ceramic filter object. In the same conditions, its transmissibility is 1.5 - 3 times that of a general piece ceramic filter element b) Apertures are evenly laid with a high filter precision that reaches 0.1micron c) Status of self-cleaning is fine without any contamination in itself d) It is liable to regenerate, which allows rinsing with brushes, polished with sand paper and flushed with clear water or repeated washing. Removes harmful bacteria such as E. coli, Fecal Coliform, Salmonella, Streptococcus, and cysts (Cryptosporidium, Giardia).

 Reduces bad taste and odor, sediment, and asbestos. Cartridge is washable up to 30 times. The flow rate of the ceramic filter can be easily renewed by simply brushing its outer surface with a stiff toothbrush, plastic brush or soft scouring pad under running water. As the top layer of ceramic and contaminants are brushed off, a new layer becomes available. Do not use soap, detergents or steel wool.


(B-B) 2.5"?10" A filter cartridge is a ceramic tube, which is cast open at both ends (OBE). Both ends are then closed off with food grade plastic mounts, which enable the cartridge to fit into a filter housing. The mount at the base of the tube is completely closed. The mount at the top of the tube has an opening through which filtered water flows after it has passed through the ceramic. Particles of dirt, bacteria etc. are trapped on the outside of the cartridge.


Ideal for RO guard and post filtration efficiency of >99.99% at 0.8 to 0.3 micron


Dimensions: 2.5" D x 10" L
Working temperature range: 5 - 38C
Working pH range: 5.5 - 9.5

This set does not include the inline filter, it is only Pre-filters set

Total 3 filters, each individually wrapped

Recently Viewed Items