The Desert Spring Products DS00200 evaporator pad is a humidifier pad made of expanded aluminum. The pad is coated with a hydrophilic material that absorbs and holds water flowing through the pad, allowing warm air flowing across the pad to evaporate the water and humidify the air.
Minerals contained in the water are left on the pad as the water evaporates, clogging the pad and restricting both water and air flow. For this reason the pad should be changed once per heating season. If you have hard water with higher mineral content, you may need to change the pad more frequently. Cleaning the pad is not recommended, as this removes the hydrophilic coating and will greatly reduce the performance of your humidifier.
An evaporator pad may also be referred to as a humidifier pad, vapor pad or Water Panel.
This pad has a plastic frame around it. When installing, insert the evaporator pad so the colour spot is at the top. The bottom is labeled "bottom".
|Enerplace Part Number:||DS00200|
|Old Enerplace Part Number:||211-D7-DS00200|
|Lifespan:||1 year (less with hard water)|
|Size (Actual):||9-3/4" x 10" x 1-3/4"|
This pad is sold under the following OEM (Original Equipment Manufacturer) brand and part numbers:
|064-3125||Desert Spring Products|
|266816-102 (case of 14)||Trion|
|DS00200||Desert Spring Products|
|DS00201 (case of 14)||Desert Spring Products|
This pad fits the following equipment:
|Desert Spring Products||DS-PFT|
|Evolution Air||Pro 3000|
|Thermolec||M500, M550, Pro 600|