Full Package of Reverse Osmosis Booster Pump 100 GPD and accessories

100 GPD booster pump is designed for membranes rated up to 100 GPD

Includes DC 24 V Transformer + 2 Connect Fittings - 1/4" Tube OD x 3/8" MIP Elbow  Part # 105327 + High Pressure Switch + low pressure switch + Holding Bracket + T connector.

Fully installed and ready for setup into your system. (NO Reverse Osmosis system included in this package) the second picture only showing you how to set up this bracket into your system.

Features

• Safe power operation with, low energy ( low voltage - 24 volt).
• The transformer is included.
• The motor if this booster is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiencies never mind if it's installed in warm, humid, a hostile environment where other pumps can not operate in such hard environments.
• Product weight 4.5 LBS - Dimensiones 8" X 4" X 4"

Note:  Using a Booster pump is recommended for those who have low incoming city water pressure of less than 50 PSI or they are on well water tank pressure 40 - 60 PSI. Buy this product only when your waste is not shutting off and/or the tank is not filling up after 2 hours. (do not buy this pump if you are on city water pressure is 55 PSI and up).  Contact us first if you are not sure what you are buying. This pump will not increase the production flow or the pressure for those who are on city water pressure 55 PSI and up.  This pump will not help those who would like to increase the water transfer volume/flow to the ice maker or the fridge or the RO faucet, that product is named a demand pump or delivery pump which is a completely different product. 

Specifications.

• item No.
  • 8100
• Flow
  • 1.30 L / MIN
• Pressure
  • 70~100PSI
• (V)
  • DC 24V 1.2A
• For RO membrane
  • 100GPD