HM-4040 LPE 2800 GPD Low Pressure Reverse Osmosis Membrane 4"X 40"

CAD $360.00

CAD $225.00

(Saving:38%)

Part Number: 104340

Out of stock

Send to:

or add name:

*We'll ask for shipping info at checkout

Reverse Osmosis membrane elements for commercial drinking water systems are the industry's most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our Reverse Osmosis membranes are shipped dry for convenient handling and long shelf-life. Our membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi.

LPE-4040 standard flow is 2800 GPD @ 150 PSI ,Now if you the reduce pressure to 60 PSI,pressure reduced 40% ,therefore permeate flow will be approximately 1200 GPD

We suggest changing your membrane every 2 years

2800 Gallon Per Day Membrane for Commercial Reverse Osmosis systems.
Removes particles down to 1/10,000th of a micron (removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC.).

Provides stable, high rejection of contaminates even with high TDS water sources.
Advanced membrane technology with innovative thin layer composite membrane design.
More consistent performance with less fouling requiring less frequent cleaning and change outs.
100% dry-stored membrane maximizing shelf life.

The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products.
Keep membrane moist at all times after initial wetting.
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.

Usage

Specifications & Parameters

Model	Active Membrane Area ft²(m²)	Permeate Flow GPD(T/D)	Stable Rejection Rate (%)
HM-4040-LPE	85(7.9)	2800	99.3

Standard Test Condition

Concentration of Solution (NaCl)	Temperature(?)	pH Value>	Operating Pressure psi(MPa)	Recovery Rate(%)
1500ppm	25	6.5-7	150 psi	15

Notes:The permeate flow of single membrane element may vary with in ±15%.

Operating Limits and Conditionsof Membrane Element:

Max.Working Pressure	300 psi(21kg/cm2)
Max. FeedWater Temperature	45 ?
Feed Water Chlorine Concentration	<0.1 ppm
Feed Water pH Range, Continuous Operation	2 - 11
Feed Water pH Range, Chemical Cleaning	SDI <= 5
Maximum Feed Water SDI (15 Minute Test)	2-11
Maximum Feed Turbidity	NTU 1.0
Maximum Pressure Drop for each Elemen	15 psi

Commonly referred to as:Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy

4" x 40" Fits nearly all standard 4" x 40" Membrane housings stainless steel, PVC, or Fiberglass