Mixed Bed De-Ionization Water Filter size 20"x4.5" industrial materials ( Car Wash / Window Cleaning )
Mixed Bed De-Ionization Water Filter size 20'x4.5' industrial materials ( Car Wash / Window Cleaning )

Mixed Bed De-Ionization Water Filter size 20"x4.5" industrial materials ( Car Wash / Window Cleaning )

CAD $145.00
CAD $125.00
  (Saving:14%)
Part Number: 104143
In Stock

Choose Options

Housing Type
Non Refillable
Refillable (10.00)
*We'll ask for shipping info at checkout
Quantity Pricing
Quantity
Price
  • 3 - 6
  • 118.75
  • 12
  • 112.50
  • 15 - 20
  • 100.00
  • 20 - 25
  • 93.75
  • 24
  • 100.00

Detailed Description:

20" Big Blue Mixed Bed Deionization Filter for industrial materials

  • Filter Media: Mixed Bed ion exchange resin
  • Size: 4.5" x 20" Fits most standard 20" size housings
  • Operational Temperature Range: 40°F to 125°F
  • Operational Pressure Range: 25-75PSI maximum.
  • Refillable Cartridge - Use our bulk DI Resin bags to refill this cartridge 104138-22
  • All filters are individually wrapped and you should always keep the produce in closed bag and moist to avoid any dryness. Avoid direct sun shine and storage should be in room temp 35 to 90 Fahrenheit.
  • Filter life approx. 80-8,000 Gallons Depending on the incoming water quality (incoming PPM) please see the following chart
Capacity (gal.) according to the incoming PPM to the filter
5 ppm 8000 gallons
10 ppm4000 gallons
50 ppm800 gallons
100 ppm400 gallons
200 ppm200 gallons
300 ppm133 gallons
400 ppm100 gallons
500 ppm80 gallons
Installation Instructions
  • Shutoff the water
  • Note the flow direction on the filter
  • For the quick connect fitting fully push the scratch-free tube into the fitting. For threads, install seal-taped fittings and tighten them firmly.
  • Use two wrenches to tighten the tubing.
  • Turn the water on and check for leaks. If leaks persist, call your supporting dealer.
  • Flush 4 gallons of water through the filter before use.
Specifications

Why isn't my DI resin reading 0 TDS? Could it be defective?

 Firstly, it's crucial to recognize that the lifespan of resin is relatively short. Any incorrect setup or application can lead to brief periods of 0 PPM output, typically lasting only 1 to 2 minutes. Therefore, it's imperative to meticulously follow instructions to grasp the resin's functionality and make an informed decision about investing in such systems.

When DI resin fails to produce water with zero Total Dissolved Solids (TDS), there are various potential causes. Let's explore some common reasons behind this issue:

 

1.      Resin Exhaustion: DI resin becomes exhausted and loses its effectiveness over time or after processing a significant volume of water. Check usage against recommended PPM guidelines for replacement.

2.      Improper Usage: The lifespan of resin is brief, and any incorrect setup or application can lead to short periods of 0 PPM output. Follow instructions meticulously to thoroughly grasp the resin's operation before investing in such systems.

3.      Car Washing TechniqueAvoid using DI water for washing cars directly; instead, wash with regular tap water and use DI water for a final rinse. Neglecting this step can lead to dissatisfaction with system performance.

4.      Optimal DI Water Usage: Utilize the mist valve provided to control DI water usage efficiently. Without it, excessive DI water consumption during car washing can occur, leading to premature exhaustion.

5.      High Flow Rate Considerations: If water passes through the resin too swiftly (fast flow), insufficient contact time for ion exchange can result in lower purity water output (resulting in a High PPM reading).

6.      Water Temperature and Composition: Elevated temperatures and specific ions or chemicals in the water can influence ion exchange efficiency, requiring careful consideration.

7.      Proper Packing and Channeling: Inadequate resin packing or channel formation within the container can hamper effective ion exchange, potentially due to settling or improper filling.

8.      Contamination or Degradation: Resin can be compromised by various contaminants or undergo physical degradation, impacting its functionality. Mechanical wear and chemical exposure, such as from chlorine, can contribute to this.

9.      Incorrect Resin Type: Using the wrong resin type or an improper mix of cation and anion exchange resins can diminish ion removal efficiency.

 

Where to Store DI Mixed Bed Resin Media:

 

1.      Cool Environment: Store the resin in a cool, reasonably dry place. Ideal storage temperatures are between 10°C and 25°C (50°F and 77°F). Avoid extreme temperatures, especially heat, which can degrade the resin.

2.      Dry Location: Keep the resin away from direct sunlight and excessive moisture. High Humidity can affect the resin’s quality and performance.

3.      Well-Ventilated Area: Ensure the storage area is well-ventilated to prevent condensation and mold growth.

4.      Away from Chemicals: Store away from strong oxidizing agents, acids, bases, and other chemicals that can react with the resin.

 

How to Store DI Mixed Bed Resin Media:

 

1.      Keep it Away from Children.

2.      Sealed Containers: Keep the resin in airtight, sealed containers or bags to prevent exposure to air and moisture. Original packaging is often the best option if it is resealable.

3.      Avoid Freezing: Ensure the resin does not freeze, as freezing can cause physical damage to the resin beads, impacting their performance.

4.      Proper Labeling: Clearly label the containers with the type of resin, and date of purchase. This helps maintain an inventory and ensures the oldest resin is used first.

5.      Limited Exposure: Only open the containers when necessary and reseal them immediately after use to minimize exposure to air and contaminants.

6.      Regular Checks: Periodically check the condition of the resin if stored for extended periods. Look for signs of discoloration, moisture, or any other indication of degradation.

 

To address your specific situation, evaluate factors like flow rate, resin condition, and water composition, and consider replacing exhausted resin if necessary. Always ensure that your TDS meter is calibrated and reading correctly.

 * For all the above reasons, No Warranties are given, and all implied warranties of merchantability or fitness for a particular purpose are expressly excluded.


Recently Viewed Items