Home > Floor Heating > Non Return Wires

Non Return Wires

Sub-Categories

UNDER FLOOR HEATING CABLES

- The Best Quality Floor Heating Cables.

- Made In Canada.

- C-UL-US Listed, CSA, ISO 9001.2000

- No EMF ( Electric Magnetic Field ).

- No return wire type for easy installation.

- Compatible with Schluter Ditra-Heat membrane.

- Low Electrical consumption. Our heating cable has 12 watts per Sq/Ft spaced at 3 inches & 9 watts per Sq/Ft spaced at 4 inches apart.

- 25 years warranty.

- This system can be installed under tile, marble, stone, brick, Ceramic, Linoleum, engineering wood, vinyl, laminate, carpet or slate or almost with ant floor covering and heats the flooring except Hardwood; because hardwood need is humidity and also nails and heating cable don't go well together.

Made in Canada

Canada's # 1 Super Quality Floor Heating Cables. All parts are made in Canada and United States.

We do not use or sale China made Cables.

NON-RETURN RESISTANCE WIRE

PVC Copper Shield Teflon Resistance

Jacket 0 EMF Insulation Wire

HeatOn made with Super tiny wire technology with Max PVC Jacket wire thickness 3 to 4 Millimeter

( depend on the cable size) but the Max is 0.4 centimeter. Compatible with Schluter Ditra-Heat membrane.

Surface Calculator

precise measurements the key to a successful installation !

Steps to follow to calculate the area to be heated:

Room sketch
• Make a scale diagram of the room and calculate the total surface area.

Permanent fixtures
• Calculate the surface area of the permanent fixtures.
• Subtract the surface area of the permanent fixtures from the total surface area (don’t forget to calculate any angles if the walls or permanent fixtures are not square or rectangular).
• The result is the maximum area to be covered.

Buffer zones
• Provide space for buffer zones (area not necessary to heat) where you can place any excess cable.
• Subtract the buffer zone areas from the maximum area to be covered.
• You will get the minimum area to be covered.

* All measurements should be taken in inches, to insure a more precise calculation.

We list the Cables without the thermostat.

Dual Voltage Honeywell Thermostat TH115-AF-GA 120/240V Dual voltage

The best quality thermostat that handles up to 3600W for 240V and 15A of resistance and made specially for under floor heating systems. Radiant Floor Sensor is included.

Its illegal to install NON CLASS A thermostat in Bathrooms & kitchens, You are assuming the liability

We offer the BEST quality Aube / Honeywell thermostat that handles up to 3600W and 15A of resistance.

MODEL NUMBER TH115-AF- GA 120V/ 240V

*Temperature control modes
Ambient (A) – controls ambient (room) temperature using sensor in thermostat
Ambient with floor limit (AF) – controls ambient (room) temperature with possible limit on floor temperature
Floor (F) – controls floor temperature using sensor in floor

GFCI & EGFPD safety cutoffs
•GA models meet UL and CSA standards for Class A GFCIs
•GA models cut power to the heating system when a 5 mA leak is detected; GB models cut power when a 15 mA leak is detected

Coverage Example for 215 - 280 Sq.Ft

215 Sq.ft @ 3" spacing ( primary heating system )

280 Sq.Ft @ 4" spacing ( floor warming system )

You can purchase the Cables from our main site www.underfloorheatingcables.com

Return Cable Guide
Model#	12 watts Sq/Ft at 3 inches	9 watts Sq/Ft at 4 inches	7.6 cm 129w/m2	10cm 97w/m2	Watts	Amps	Ohms	Length (ft)	Links
HO-120V-10	10	13	0.9	1.2	120	1	122	40	10 - 13 Sq.Ft
HO-120V-15	15	19	1.3	1.8	180	1.5	62	60	15 - 19 Sq.Ft
HO-120V-20	20	26	1.8	2.4	240	2	60	80	20 - 26 Sq.Ft
HO-120V-25	25	33	2.25	3	300	2.5	47	100	25 - 33 Sq.Ft
HO-120V-30	30	40	2.7	3.6	360	3	37	120	30 - 40 Sq.Ft
HO-120V-35	35	46	3.2	4.1	420	3.6	35	140	35 - 46 Sq.Ft
HO-120V-40	40	52	3.6	4.8	480	4	30	160	40 - 52 Sq.Ft
HO-120V-45	45	60	4	5.4	540	4.5	26	180	45 - 60 Sq.Ft
HO-120V-50	50	65	4.5	6	600	5	25	200	50 - 65 Sq.Ft
HO-120V-57	57	75	5.1	6.8	684	5.7	21	230	57 - 75 Sq.Ft
HO-120V-67	67	87	6	7.8	804	6.7	17	270	67 - 87 Sq.Ft
HO-120V-75	75	98	6.8	8.8	900	7.5	16	300	75 - 98 Sq.Ft
HO-120V-80	80	105	7.2	9.5	960	8	15	320	80 - 105 Sq.Ft
HO-120V-85	85	110	7.7	10	1020	8.5	15	340	85 - 110 Sq.Ft
HO-120V-95	95	125	8.6	11.3	1140	9.5	12	380	95 - 125 Sq.Ft
HO 120V-107	107	140	9.6	12.6	1284	11	11	430	107 - 140 Sq.Ft
HO-120V-125	125	162	11.3	14.4	1500	12.5	9.5	500	125 - 162 Sq.Ft
HO-120V-140	140	182	12.6	16.5	1680	14	9	560	140 - 182 Sq.Ft


No Return Cable Guide
Model#	12 watts Sq/Ft at 3 inches	9 watts Sq/Ft at 4 inches	7.6 cm 129w/m2	10cm 97w/m2	Watts	Amps	Ohms	Length (ft)	Links
HO-240V-15	15	20	1.35	1.8	180	0.75	325	60	15 - 20 Sq.Ft
HO-240V-20	20	26	1.8	2.4	240	1	243	80	20 - 26 Sq.Ft
HO-240V-25	25	33	2.25	3	300	1.25	186	100	25 - 33 Sq.Ft
HO-240V-30	30	39	2.7	3.6	360	1.5	124	120	30 - 40 Sq.Ft
HO-240V-35	35	45	3.15	4	420	1.75	140	140	35 - 45 Sq.Ft
HO-240V-40	40	52	3.6	4.8	480	2	120	160	40 - 52 Sq.Ft
HO-240V-50	50	65	4.5	6	600	2.5	95	200	50 - 65 Sq.Ft
HO-240V-60	60	80	5.4	7.2	720	3.1	75	240	60 - 80 Sq.Ft
HO-240V-70	70	90	6.3	8.1	840	3.5	70	280	70 - 90 Sq.Ft
HO-240V-80	80	105	7.2	9.5	960	4	60	320	80 - 105 Sq.Ft
HO-240V-90	90	117	8.1	10.5	1080	4.5	53	360	90 - 117 Sq.Ft
HO-240V-100	100	130	9	11.7	1200	5	50	400	100 - 130 Sq.Ft
HO-240V-115	115	150	10.4	13.5	1380	5.7	43	460	115 - 150 Sq.Ft
HO-240V-135	135	175	12.2	16.2	1620	6.8	35	540	135 - 170 Sq.Ft
HO-240V-150	150	195	13.5	18	1800	7.5	32	600	150 - 195 Sq.Ft
HO-240V-160	160	208	14.4	18.7	1920	8	31	640	160 - 208 Sq.Ft
HO-240V-170	170	220	15.3	20.3	2040	8.5	30	680	170 - 220 Sq.Ft
HO-240V-190	190	245	17.1	22	2280	9.5	25	760	190 - 245 Sq.Ft
HO-240V-215	215	280	19.4	25.2	2580	11	22	860	215 - 280 Sq.Ft
HO-240V-250	250	325	23.85	31	3000	12.5	20	1000	250 - 325 Sq.Ft

Installation Manual - English

Installation Manual - French

Power consumption calculator

A: First, calculate the coverage of the cable you are using in square feet.

B: Determine if you are using 12 Watts or 9 watts per sq/ft

C: Find out what your cost of electrical energy is per hour. Multiply the cost by your power consumption to get your cost

Example :

If you are using a TW 050065240 unit spaced at 3 inches, your power consumption will be 12 Watts per sq/ft

Your total power consumption per hour will be: 12 X 50 = 600 Watts

If your local cost of energy is 12 cents per KW/Hr: 12 X 600 = 7200

Since a kilowatt is 1000 watts, your cost will be 7.2 cents an hour

If your heat is on for

12 hours a day, it will cost you 12 X 7.2 = 86.4 Cents

Thermostat

Honeywell Model TH115-AF-GA built-in GFCI Programmable Thermostat for radiant floor heating with 5mA.

Heat ON uses Class A thermostat Only ( Ground Fault Circuit Interrupter) , this thermostat is also an electronic on/off thermostat for control of temperature by means of a sensor either placed externally or build into the thermostat. It has a build in clock function for automatic comfort and setback.

Heat ON Generates 12 watts of comfort per square foot of flooring (120 w/square foot). The thermostat will preset your personalized comfort. While saving electricity and money.

Heat ON comes as a heating cable. a heating mat, or a combination of both. It heats safely, with less that the minimum acceptable emissions of EMF (electromagnetic field).