HIGH PRESSURE SWITCH FOR REVERSE OSMOSIS BOOSTER PUMP (ON - OFF) OPERATION CONTROL WIRE
Body Material: Plastic, Color is while or Black, but mostly is weight.
Fittings:1/4" compression fitting, easily fitted to 1/4" OD plastic tubing or copper tubing
Electrical: Normally closed / NC
Pressure setting: For water pressure, ON at 20 psi (+ 5) ;OFF at 45 psi (+ 5).
The above pressure setting is (factory setting) at this pressure. You can adjust the pressure setting manually (not recommended if you do not have to right PSI measurement tools), by turning the hex screw on top of the switch. The ON can be adjusted approximately 35 to 55 psi, OFF can be adjusted approximately 15 to 30 psi
The purpose of installing High Pressure Switch is to turn off the Booster Pump when the tank is full.
Included: One Tank High Pressure Switch 1/4" Tube Connector + one wire
6 points will be rewarded to you when you buy this item.