Reverse Osmosis Pressure Reducing limit Valve 70 PSI Water Filter regulator NSF certified

Detailed Description

NSF Certified 70 PSI Reverse Osmosis Pressure Reducing/Regulator Valve

If your incoming water pressure is higher than 70PSI it can cause premature failure of you RO system, and may even cause damage to the system resulting in leakage and possible water damage. We highly recommend adding a pressure if you suspect your water pressure may be too high.

Features

• Filter Protection Valve 70PSI, ¼" Inlet/Outlet Quick Fit Connectors
• Ideal for Reverse Osmosis Systems and any situation where you need to limit water pressure to 70PSI
• Designed for use with ¼" tube (0.25” Outside Diameter/0.17” Inside Diameter)

Specifications

• Limiting Valve: 70PSI
• Flow Rate: 7.5L/min at 100 PSI
• Max Pressure: 230 PSI
• Max Temperature: 40 D°C
• Certified to NSF/ ANSI 61 Section 9

Installation Notes

• Installation must be carried out by a qualified person
• All pipe work must be flushed prior to installation
• Do not apply heat near valve during installation
• Must be fitted downstream of approved isolation valve
• Must be installed in the direction as indicated by the flow arrow
• Must be installed according to local regulations