Reverse Osmosis Replacement Filters Coconut Shell Carbon Inline Sediment 100 GPD

2 x Sediment Filter 5 micron Dirt/Rust remover

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt holding capacity
• No surface binders to reduce flow and increase change-out frequency

1 x Carbon Block Filter

• CTO Carbon Block Filter // Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.

1 x Standard Inline Carbon Cartridges 

• Dimensions: 2" x 10" // Fits all Reverse Osmosis Systems // 10 Micron Nominal
• Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt
• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100F
• Inlet/Outlet: 1/4" NPT

1 x Reverse Osmosis Membrane NSF Certified

• 100 GPD R.O. Membrane at 60 PSI // Model #: 1812-50
• We Suggest to change your membrane every 2 year
• To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).

Total 5 filters, each individually wrapped.