Reverse Osmosis Replacement Water Filters, 25 cartridges

7 x Sediment Filter 5-micron Dirt/Rust remover

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt-holding capacity
• No surface binders to reduce flow and increase change-out frequency

7 x GAC UDF 10” Coconut Shell Carbon Filter

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon
• 5 Micron nominal filter woven included preventing carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

7 x Sediment Filter 1-micron Dirt/Rust remover

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment
• Scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact
• No leach able or extractable to contaminate
• Long life and increased dirt-holding capacity
• No surface binders to reduce flow and increase change-out frequency

4 x Inline Carbon Cartridges are GAC T33 Activated Granular Carbon Filter // Filter Media: Base T33 Activated Granular Carbon

• Dimensions: 2" x 10" // Fits all Reverse Osmosis Systems // 10 Micron Nominal
• Removes Chlorine, Bad Taste & Odor, Turbidity , Sediment,THMs, and Dirt
• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100F
• Inlet/Outlet: 1/4" NPT

Filters part numbers included in this kit:

• 1- Sediment Filter 5 Micron 104002
• 2- GAC Filter 104004
• 3- Sediment Filter 1 Micron 104001
• 4- Inline Filter 104041

Total 25 filters, each individually wrapped