If you own a 5-stage RO System this filter set replaces all the pre filters and the post carbon filter. If your membrane is more than 2 years old or if you think it may be time to change it, check out our 5 Stage Reverse Osmosis Full Replacement Water Filter Kit With 50 GPD Membrane.
If you have additional Stages, this pack has most of what you need and checkout our Inline Filters category to find replacement filters for your setup.
Detailed Description:
Reverse Osmosis Replacement Water Filter Set
This kit is the universal replacement set for most of our Reverse Osmosis systems, and contains one of each of the pre-filters as well as the inline polishing filter. We recommend replacing these filters every 6-12 months depending on incoming water quality and frequency of system use. This kit contains the following:
1x 10" Standard 5-micron Sediment Filter 104002
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
- Meets FDA requirements for food and beverage contact
- No leach able or extractable to contaminate
- Long life and increased dirt holding capacity
- No surface binders to reduce flow and increase change-out frequency
1x 10" Standard Granular Activated Carbon (GAC) Filter 104004
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
- 5 Micron nominal filter woven included preventing carbon fines to pass from the filter to your drinking water.
- Operation Temperature: 40°F to 125°F
- Lower pressure drop
1 x 10" Standard Carbon Block (CTO) Filter104005
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
- Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.
1x Inline Granular Activated Carbon Filter 104041
- Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt
- Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
- Max Flow: 0.5 GPM
- Max Pressure: 125 PSI
- Max Temperature: 100°F
- Inlet/Outlet: ¼" NPT
Total 4 filters, each individually wrapped.
Filter Replacement Options and Alternatives for Item Number:104504
(1)
(1)
(2)
