Reverse osmosis booster pump 150 - 200 gpd.
Reverse osmosis booster pump 150 - 200 gpd.

Reverse osmosis booster pump 150 - 200 gpd.

CAD $200.00
Part Number: 105017
Out of stock
*We'll ask for shipping info at checkout

Reverse osmosis booster pump 150 - 200 gpd.

150–200 GPD Reverse Osmosis Booster Pump

Improve the operating pressure and performance of your residential or light-commercial reverse osmosis system with the 150 GPD RO booster pump. Designed for reverse osmosis membranes rated from 150 GPD up to 200 GPD, this high-flow pump is ideal for systems with low municipal water pressure, well-pressure systems, slow storage-tank filling, or continuous drain-water flow caused by insufficient feed pressure.

By supplying the RO membrane with stronger and more consistent operating pressure, this booster pump helps improve membrane efficiency, supports more reliable purified-water production, and helps the membrane operate closer to its rated capacity.

Recommended for Low-Pressure Installations: This booster pump is recommended when incoming municipal water pressure is below approximately 50 PSI or when the RO system is supplied by a well-pressure tank operating around 40–60 PSI.

Consider This Booster Pump If:

  • Your RO storage tank takes more than two hours to fill
  • Your system continuously sends water to the drain
  • Your incoming water pressure is below approximately 50 PSI
  • Your RO membrane is not reaching its expected production capacity
  • Your property uses a well-pressure tank with variable pressure
  • Your system uses a 150–200 GPD residential or light-commercial membrane

This Pump May Not Be Suitable If:

  • Your city-water pressure is consistently 55 PSI or higher
  • You only want to increase water flow to a refrigerator, ice maker, or RO faucet

Increasing delivery flow from a storage tank to a faucet, refrigerator, or ice maker normally requires a delivery pump or demand pump, which is a different product.


Key Features

  • Designed for reverse osmosis membranes from 150 GPD up to 200 GPD
  • High nominal flow rate of 2.30 L/min.
  • Suitable for residential and light-commercial RO applications
  • Low-voltage 24V DC operation
  • Helps improve RO membrane operating pressure
  • Supports faster storage-tank filling under low-pressure conditions
  • Helps improve membrane efficiency and purified-water production
  • Can be mounted in different positions to suit the installation
  • Smooth, efficient operation under varying system loads and ambient temperatures
  • Pump duty cycle depends on feed pressure, system load, water temperature, and installation conditions
  • Approximate weight: 3.5 lb.
  • Approximate dimensions: 8 in. × 4 in. × 4 in.

Included Components

  • Model 8200 reverse osmosis booster pump for 150–200 GPD membranes
  • 24V DC power transformer
  • Two 1/4-inch tube OD fittings are included for the pump inlet and outlet connections.

Please Note: This package includes only the components listed above. High-pressure shut-off switches, low-pressure safety switches, automatic shut-off valves, solenoid valves, mounting brackets, T-connectors, and other accessories are not included unless specifically stated in the product title or selected as an optional upgrade.

Reverse osmosis system not included. Any RO system shown in additional product images is provided only to demonstrate the recommended pump installation.


Specifications

Specification Details
Model / Item Number 150 GPD
Nominal Flow Rate 2.30 L/min.
Operating Pressure 70–100 PSI
Electrical Rating 24V DC, 2A
Recommended RO Membrane Capacity 150–200 GPD

Booster Pump Setup Guide

Review the installation guide before connecting the booster pump to your reverse osmosis system.

View the Booster Pump Setup Guide

Product Appearance Notice: Product labels, colours, fittings, housing styles, and minor visual details may vary according to supplier and production batch. All supplied units are intended to meet the advertised specifications and performance requirements.

Have a question? If you are unsure whether this 150–200 GPD booster pump is suitable for your RO system, contact us before ordering. Please provide your incoming water pressure and membrane capacity so we can help you choose the correct pump.

Recently Viewed Items

Logo