Transformer for Part # 105083 & 105086 w/ Light and Audio Alarm Ballast 55W
Important Compatibility Notice: This 55W UV ballast and transformer is designed only for compatible Max Water UV systems Part No. 105083 and Part No. 105086 .
Confirm the part number, lamp wattage, connector type, voltage, and number of lamps on your existing UV system before ordering.
55W Replacement UV Ballast and Transformer with Light and Audio Alarm
Restore the electrical operation and lamp-monitoring functions of a compatible Max Water ultraviolet water sterilizer with this 55-watt replacement UV ballast and transformer.
The ballast supplies the required electrical power to the compatible UV lamp and includes visual and audible operating indicators to help identify lamp failure, connection problems, or other operating faults.
Transformer Only: This package includes one replacement ballast and transformer. The UV lamp, quartz sleeve, stainless-steel chamber, wiring harnesses, and other UV-system components are not included unless specifically stated.
Compatible UV Systems
- Max Water 12 GPM, 55W UV sterilizer, Part No. 105083
- Max Water 24 GPM dual-lamp UV sterilizer, Part No. 105086 ( 2 required )
Dual-Lamp System Notice: System 105086 uses two UV lamps. Confirm whether your system uses one ballast for each lamp or a shared ballast configuration before ordering the required quantity.
Key Features
- 55-watt UV ballast and transformer
- Designed for compatible 110V UV sterilizer systems
- Visual operating-status indicator
- Audible fault alarm
- Helps identify lamp failure or ballast problems
- Replacement option for compatible Max Water UV systems
- Suitable for residential and commercial UV-water-treatment equipment
Indicator and Alarm Functions
| Indicator | Meaning |
|---|---|
| Green Light | Indicates that the ballast and connected UV lamp are operating normally. |
| Red Light | Indicates a lamp, connection, ballast, or operating fault. |
| Audible Alarm | Sounds when the ballast detects a lamp failure or another operating problem. |
The exact indicator behaviour may vary slightly according to ballast production batch and UV-system configuration.
Included Component
- One 55W replacement UV ballast and transformer
Not Included: UV lamp, quartz sleeve, reactor chamber, mounting hardware, O-rings, seals, and other UV-system parts are not included.
Before Ordering
- Confirm the UV-system part number
- Confirm the UV-lamp wattage
- Confirm the input voltage
- Confirm the lamp connector and pin arrangement
- Confirm whether the system uses one or two lamps
- Compare the plug and cable connections with your original ballast
Replacement Appearance Notice: The supplied ballast may be a compatible replacement and may not have the same label, colour, shape, or housing design as the original transformer installed in your UV system.
Compatibility should be confirmed using the electrical rating, connector type, lamp wattage, and UV-system part number rather than appearance alone.
Installation Guidelines
- Disconnect the UV system from electrical power before servicing
- Confirm that the replacement ballast matches the UV lamp wattage
- Keep the ballast in a clean, dry, and ventilated location
- Do not install the transformer where it may be exposed to water
- Inspect all electrical connectors before applying power
- Do not modify, cut, or splice connectors unless properly qualified
- Confirm that the green operating light is on after installation
- Confirm that no red warning light or alarm remains active
Electrical Safety Warning: Disconnect power before installation or service. Electrical work should be completed by a qualified person in accordance with applicable electrical codes and manufacturer instructions.
Product Notice: Ballast labels, housing style, indicator position, wire length, plug configuration, and minor visual details may vary by supplier or production batch. The replacement unit is intended to meet the listed compatibility and operating requirements.
