Water Filter Set (UDF Carbon GAC + Sediment Filters 5Micron + Pleated sediment 5Micron water filter) Size 10"x2.5"

Detailed Description:

Reverse Osmosis Replacement Pre-Filter Set contains the following:

1x Pleated Sediment Filter 5 micron Dirt/Rust Remover 104012

• Pleated Polypropylene Sediment Filter - 5 micron nominal rating.
• Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove small particles & matter such as silt, rust, sand, algae, sediment, scale particles from water.
• Meets FDA requirements for food and beverage contact.
• Washable filter to help minimize the filtration costs.
• Operation Temperature: 40°F to 140°F
• Low surface area, lower pressure drop.

1x Sediment Filter 5 micron Dirt/Rust Remover104002

• Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• Meets FDA requirements for food and beverage contact.
• No leachable or extractable to contaminate outflowing water.
• Long life and increased dirt holding capacity.
• No surface binders to reduce flow and increase change-out frequency.

1x UDF GAC 10" Coconut Shell Carbon Filter 104004

• Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
• Removes Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• Thick Wall Coconut Base Carbon Filter Media in 100% coconut shell carbon Designed For maximum contact between the water and carbon.
• 5 micron nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
• Operation Temperature: 40°F to 125°F
• Low pressure drop across filter stage

Total 3 filters, each individually wrapped