Detailed Description:
10" Standard Whole House Replacement Filters
Replacement filters for our 3-stage 10” Standard Whole House systems, and can be used to replace the pre-filter stages in most of our RO systems. NOTE: This package does not contain a inline carbon post filter, only the 3 pre-filter stages.
1x 10" Standard 5 Micron Pleated Sediment Filter Filter 104012
- Pleated Polypropylene Sediment Filter - 5 micron nominal rating.
- Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
- Used to Remove small particles & matter such as silt, rust, sand, algae, sediment, scale particles from water.
- Meets FDA requirements for food and beverage contact.
- Washable filter/minimize the filtration cost.
- Operation Temperature: 40°F to 140°F
- Low surface area, lower pressure drop.
1x 10" Standard 5 Micron Granular Activated Carbon (GAC) Filter 104072
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
- 5 Micron filter membrane included to prevent carbon fines to pass from the filter to your water.
- Operation Temperature: 40°F to 125°F
- Lower pressure drop
1x 10" Standard 5 Micron Carbon Block (CTO) Filter 104005
- Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
- Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
- Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.
Total 3 filters, each individually wrapped.
Filter Replacement Options and Alternatives for Item Number:104521
(1)
Sale
Part Number: 104004
In Stock