Whole House Replacement Filter Set Pleated/GAC/CTO - 7 sets

Detailed Description:

10" Standard Whole House Replacement Filters

Replacement filters for our 3-stage 10” Standard Whole House systems.

7x 10" Standard 5 Micron Pleated Sediment Filter Filter 104012

• Pleated Polypropylene Sediment Filter - 5-micron nominal rating.
• Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
• Used to Remove small particles & matter such as silt, rust, sand, algae, sediment, and scale particles from water.
• Washable filter/minimize the filtration cost.
• Operation Temperature: 40°F to 140°F
• Low surface area, lower pressure drop.

7x 10" Standard 5 Micron Granular Activated Carbon (GAC) Filter 104072

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• 5 Micron filter membrane is included to prevent carbon fines from passing from the filter to your water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

7x 10" Standard 5 Micron Carbon Block (CTO) Filter 104005

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
• Remove small particles and carbon fines that may pass from the second stage & ensure 100% chlorine removal from water.