Whole House/RO Pre-filter Replacement Set 5µ Sed/GAC/CTO -5 sets

Detailed Description:

10" Standard Whole House Replacement Filters

5 full sets of replacement filters for our 3-stage 10” Standard Whole House systems, and can be used to replace the pre-filter stages in most of our RO systems. NOTE: This package does not contain a inline carbon post filter, only the 3 pre-filter stages.

5x 10" Standard 5 Micron Sediment Filter 104002

• Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• No leachable or extractable materials to contaminate outflowing water.
• Long life and increased dirt holding capacity.
• No surface binders to reduce flow and increase change-out frequency.

5x 10" Standard 5 Micron Granular Activated Carbon (GAC) Filter 104072

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• 5 Micron filter membrane is included to prevent carbon fines from passing from the filter to your water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

5x 10" Standard 5 Micron Carbon Block (CTO) Filter 104005

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
• Remove small particles and carbon fines that may pass from the second stage & ensure 100% chlorine removal from water.