Full Automatic 6-head Servo Driven Plunger Filling Machine PPFM-6
Filling
Capacity:
50ml bottles: 1800-2000b/hr
100-150ml bottles: 1800b/hr
500ml: about 1600b/hr
The error range of the 6-head Filling Machine is within ±1% (or within 1-2%, if negative
errors are not allowed)
The filling machine is equipped with upper and lower liquid level sensors, to start and stop
feeding automatically according to the liquid level setting.
The patented vacuum suction filling head is adopted, and the material receiving plate is
added at the same time, which can double guarantee that the conveyor and the bottle mouth will
not be polluted.
The connection interface between the mixing tank and filling machine is F50mm.
316L stainless steel quantitative material cylinder, one-time forming, aero model level,
thickness 4mm
Servo drive plunger quantitative
SIEMENS control interface
Parameters
- Filling range: 50-1000ml
- Filling accuracy: ± = 1%
- Power supply: 380V 50 / 60Hz
- Power rate: 2.5kW
- Gas pressure: 0.5-0.7mpa
- Equipment measurement: 2000 * 1800 * 2400 (mm)
Public facilities required:
- Power supply: 380 / 220 V ± 15%, 3-phase + ground wire, 50Hz
- Compressed air: Dry & clean gas, pressure 0.4-0.6mpa
- Humidity: maximum 98%
- Ambient temperature: 0-40 ?
- Motor drive device: IP55
? Electrical installation: IP54
Includes CIP Cleaning
system
1- Spraying heads & Control System
(SIEMENS)
2- Self-priming pump
3- 300kg stainless steel heating hot water
tank: provided by the customer.
4- 300kg stainless steel Alkali water tank:
provided by the customer too