Detailed Description:
3-stage Whole House/Cottage Water Filter
Are you concerned with scale and mineral deposits in your pipes and appliances? Our 10” Standard Whole House is a cost effective for smaller spaces such as RV's, apartments, cottages and any other light duty applications where space is at a premium. This system will not disinfect water should only be used in areas where the water supply is biologically safe, or in conjunction with a UV sterilizer or other disinfection techniques.
If you have a larger home/cottage or have more than 2 people using the water consistently, you may want to consider looking at some of our higher capacity systems.
However, it's crucial to clarify that this filter isn't intended for direct consumption as a drinking water filter. Its primary purpose lies in serving as a comprehensive whole-house water filter, effectively managing iron and calcium levels in the water. While it addresses the hardness with slowphos, it does not entirely eliminate it. Therefore, using filtered water for drinking purposes may reintroduce some iron and calcium into the body. This information underscores the filter's specific design and functionality, ensuring users are well-informed about its intended use and limitations.
Pre-loaded Filter Cartridges:
- 1st Stage: 5 Micron Polypropylene Sediment Filter 104002
- 2nd Stage: Phosphate Anti-Scale Filter 104265
- 3rd Stage: (CTO) Carbon Block Filter 104005
Vertical Hydraulic Gauge
Having a pressure gauge is helpful in monitoring your incoming water pressure, internal unit pressure & when to replace the filters. It's best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter's media is exhausted as the water inside the system can’t pass through the filters normally.
Removes/Reduces:
- Sediment (silt, dirt, rust, ETC.)
- Pesticides
- Bad Taste & Odors
- Giardia Cysts
- Chlorine
- Turbidity
- Herbicides
- VOCs (Volatile Organic Compounds)
- THMs (Trihalomethanes)
- MTBEs (Methyl Tert-Butyl Ethers)
Includes:
- 1x 3-Stage White Steel Mounting Bracket
- 3x 10" Filter Housing, ¾ NPT Inlet/Outlet
- 2x Dry Pressure Gauges
- 1x Opening Spanner/Wrench
Specifications:
- Filter Life: Approx. 6 to 12 months
- Maximum Operating Pressure: 90psi
- Maximum Operating Temperature: 100°F
- Recomended Operating Temperature Range: 40-100°F
- Dimensions: Approx 14" Height x 17" Width (with gauge) x 5.25" Depth
- Total Weight: Approx. 17 Lbs with Filters
- Flow Rate: 1-10gpm* for ¾" Inlet/Outlet
*Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions.
Filter Replacement Options and Alternatives for Item Number:103464
(1)
(1)
(1)
