26 RO Replacement Filters with 2 50GPD Membranes

Detailed Description:

Reverse Osmosis Replacement Filter Set with 50 GPD RO Membrane

This kit is the universal replacement set for most of our Reverse Osmosis systems, and contains six each of the pre-filters, two 50 GPD RO membranes and three inline polishing filters. We recommend replacing these pre/post filters every 6-12 months and the RO membrane every 2 years depending on incoming water quality and frequency of system use. This kit contains the following:

6x 10" Standard 5-micron Sediment Filter 104002

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Used to remove larger particles & matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
• No leach able or extractable to contaminate
• Long life and increased dirt-holding capacity
• No surface binders to reduce flow and increase change-out frequency

6x 10" Standard Granular Activated Carbon (GAC) Filter 104004

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
• 5 Micron filter woven included to prevent carbon fines to pass from the filter to your water.
• Operation Temperature: 40°F to 125°F
• Lower pressure drop

6x 10" Standard Carbon Block (CTO) Filter 104005

• Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
• Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
• Remove small particles and carbon fines that may pass from the second stage & ensure 100% chlorine removal from water.

2x 50 GPD Reverse Osmosis Membrane 104092

• 50 GPD R.O. Membrane at 60 PSI
• Model# 1812-50
• We Suggest to change your membrane every 2 years
• To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).

6x Inline Granular Activated Carbon Filter 104041

• Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt
• Used to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
• Max Flow: 0.5 GPM
• Max Pressure: 125 PSI
• Max Temperature: 100°F
• Inlet/Outlet: ¼" NPT