Whole House/RO Pre-filter Replacement Set 5µ Sed/Anti-Scale/CTO
Whole House/RO Pre-filter Replacement Set 5µ Sed/Anti-Scale/CTO

Whole House/RO Pre-filter Replacement Set 5µ Sed/Anti-Scale/CTO

CAD $104.00
CAD $75.00
  (Saving:28%)
Part Number: 104323
In Stock
*We'll ask for shipping info at checkout
Quantity Pricing
Quantity
Price
  • 3 - 6
  • 71.25
  • 12
  • 67.50
  • 25
  • 63.75

Detailed Description:

10" Standard Whole House Replacement Filters

Replacement filters for our 3-stage 10” Standard Whole House systems, and can be used to replace the pre-filter stages in most of our RO systems. NOTE: This package does not contain a inline carbon post filter, only the 3 pre-filter stages.

1x 10" Standard 5 Micron Sediment Filter 104002

  • Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.
  • Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
  • Meets FDA requirements for food and beverage contact.
  • No leachable or extractable materials to contaminate outflowing water.
  • Long life and increased dirt holding capacity.
  • No surface binders to reduce flow and increase change-out frequency.

10" Standard Whole House Siliphos Anti-Scale Filter104265

  • NOTE: Due to the nature of the material, Siliphos balls may crack into shards during shipping. Shards can still be used as normal, and may allow you to squeeze a bit more material into a filter housing.
  • Hard water is common to 85% of the north American cities and affects both those with city water and well water Hard water is caused by the presence of calcium and magnesium minerals in the water. When it is not treated, these natural minerals can be "sticky" as they encounter stress in the house, such as temperature change, pressure, or turbulence. This sticky mineral will form hard water stains on counter tops and shower walls, and will affect the way the soap lathers.
  • Hard water problems are even worse in areas where you can't see them. Hard water build-up will form inside of pipes, on the heating coil or element in your water heater, inside shower heads and faucets, and in other areas that can't be seen or cleaned. These deposits will start to clog faucets, filters, and pipes.
  • Water heaters and other water-using appliances will exhibit hard water problems such as a reduction in water flow, and will require repair or replacement. Hard water scale build-up will also increase energy usage in appliances, can cause them to fail prematurely.

  • Scale Prevention: Used to sequester water hardness, inhibit precipitation, and formation of mineral deposits in pipes & appliances.
  • Corrosion Inhibition : Used to form a protective coating on metal surfaces and provide corrosion protection against acidity, alkalinity, and many other mineral salts which may lead to the "rusting out" of water system pipes and equipment.
  • Iron Control : Used to sequester dissolved iron up to 10 ppm; Great for reducing discoloration and metal taste for water and helps prevent iron from staining sinks, showers and toilets.

  • Siliphos is great for reducing and preventing scale build up in in a wide range of applications including:

  • Pre-filter for RO Equipment
  • Domestic Water Systems
  • Refrigeration Equipment Coffee Machines
  • Water Purifying Equipment Ice Machines
  • Air Conditioning Equipment Water Wells
  • Vending Machines Food Service Equipment
  • Normally a concentration of Siliphos at threshold levels of 0.5-5.0 ppm Polyphosphate will inhibit scale and corrosion. Use 5.0 to 10.0 pounds of beads per filter. The filter should be placed in an area where there is good water flow and should only be used with cold water.

    However, it's crucial to clarify that this filter isn't intended for direct consumption as a drinking water filter. Its primary purpose lies in serving as a comprehensive whole-house water filter, effectively managing iron and calcium levels in the water. While it addresses the hardness with slowphos, it does not entirely eliminate it. Therefore, using filtered water for drinking purposes may reintroduce some iron and calcium into the body. This information underscores the filter's specific design and functionality, ensuring users are well-informed about its intended use and limitations.


1x 10" Standard 5 Micron Carbon Block (CTO) Filter 104005

  • Size 2.5" x 9 7/8" Fits most standard 10" size housings and most reverse osmosis systems.
  • Thick Wall 100% coconut shell carbon Designed For maximum contact between the water and carbon
  • Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.

 

Total 3 filters, each individually wrapped.

Filter Replacement Options and Alternatives for Item Number:104323

Polypropylene Sediment Filter 5 Micron, size 10
Average Rating(1)
Sale
14.00  8.00
Part Number: 104002
In Stock
10
Sale
65.00  50.00
Part Number: 104265
In Stock
CTO Carbon Block Filter  5 Micron 10
Average Rating(1)
Sale
25.00  17.00
Part Number: 104005
In Stock

Recently Viewed Items