Whole House/RO Pre-filter Replacement Set 5µ Sed/Iron-Manganese/CTO
1 set of replacement filters with following :
1 x Sediment Filter 5 micron Dirt/Rust remover
- Size 9 7/8 inch x 2.5 inch - Fits most standard 10 Inch size housings and most reverse osmosis systems.
- Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
- Meets FDA requirements for food and beverage contact.
- No leachable or extractable material to contaminate outflowing water.
- Long life and increased dirt holding capacity.
- No surface binders to reduce flow and increase change-out frequency.
1 x Iron / Manganese Water Filter
- Product Overview
- Iron manganese media, used for removing soluble iron (Fe) and/or manganese (Mg) as well as hydrogen sulfide (H2S) from well water supplies, is a purple-black filter media processed from ceramic zeolite granule. Iron manganese media can be used in a completely closed pressure system with no aeration or re-pumping, or in an open gravity filter system.
- The most common methods of operation are continuous regeneration, which is recommended for predominantly iron water.
- Physical Characteristics
- Apparent Density: 1.0 g/ml
- Specific Gravity: 2.5~2.6
- Screen Grading (dry): 16~30 mesh
- Effective Size: 0.65 ± 0.05mm
- Uniformity Coefficient: Less than 1.5
- pH Range: 6.2 ~ 8.5
- Maximum Temperature: 25 C°
- Maximum Pressure Drop: 0.85 kg/cm2
1 x CTO Carbon Block Filter
- Size 9 7/8 inch x 2.5 inch Fits most standard 10 Inch size housings and most reverse osmosis systems.
- Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.
Total 3 filters, each individually wrapped.
Filter Replacement Options and Alternatives for Item Number:104322
(1)
Sale
Part Number: 104002
In Stock



