Light Commercial Reverse Osmosis System 200 GPD
Light Commercial Reverse Osmosis System 200 GPD

Light Commercial Reverse Osmosis System 200 GPD

CAD $850.00
Part Number: 101130
In Stock

Choose Options

Add Booster pump:
*We'll ask for shipping info at checkout

Light Commercial Reverse Osmosis System 200 GPD

LIGHT COMMERCIAL / AQUARIUM / REVERSE OSMOSIS SYSTEM 200 GPD

THIS SYSTEM CAN BE PURCHASED WITH / OR WITHOUT A BOOSTER PUMP, PLEASE FOLLOW THE ABOVE CHOOSE OPTIONS

NOTE: If your RO System is configured with 200 GPD Membrane, we highly recommend adding a Booster Pump to your system. Without a booster pump this system will only produce between 100-150 gallons a day as there is not enough pressure for the membrane to work at full capacity

  • If the well water has hydrogen sulfide as a reaction of Iron , sulfur , manganese present in water, and it is not treated prior to the RO membrane, it can cause problems with slime and build-up on the RO membranes if hydrogen sulfide oxidizes and/or there are sulfur bacteria present. ... RO membranes by themselves do not remove odor. You should add iron filter before the Membrane.
  • System features:

    • Provides Premium water quality with 95% to 98% Rejection. 200 Gallons Per Day.
    • Multiple uses: For your aquarium uses, Hydroponics, some special machines/ equipment such a (dental equipment) home quality drinking water for making your tasty coffee & tea, preparing foods, wash your fruit and vegetables.
    • Reduces: copper, lead, fluoride, cadmium, radium 226/228, selenium, arsenic, cysts (cryptosporidium, giardia, entamoeba & toxoplasm), barium, hexavalent chromium, trivalent chromium, copper, lead, fluoride, Odor, TDS many more.
    • Product to Waste Ratio: 1:2 Litters
    • Dimensions: RO Unit 17" to 24 "L x 7"W x 26 to 30"H. ( Depends on the model you select).
    • Total Weight: Approx 30 to 45 Lbs ( Depends on the model you select)
    • Operation Temperature: 40F to 104F / Maximum temperature 40C.
    • System Operating Pressure: 20PSI to 75PSI.
    • Lower than 50 PSI you must Select system with booster pump kit

      Higher than 75 PSI Add pressure control valve to fix the pressure @ 60 to 65 PSI for system without a booster pumps.

    • System only to be used on biologically safe water supply.
    • Filter cartridges should be changed every 4 - 12 months under domestic conditions. Varies & depend on the water source quality.
    • All required fittings & instruction manuals are included to DIY your own installation

    System stages:

    Systems WITHOUT a Booster Pump Includes:

    • Manual Shut-off Ball Valve,1/4" PE Tube 5 Meters, Automatic-shut-off valve, Feed Water Adapter and Valve, Drain saddle Valve valve , Flow Restrictor & wrench. All filters and Membranes are included

    Systems WITH Booster Pump includes:

    • Manual Shut-off Ball Valve, 1/4" PE Tube 5 Meters, Feed Water Adapter and Valve, Drain saddle Valve valve , Flow Restrictor & wrench + 1 Pcs booster pumps & High Pressure Switch.
    • All filters and Membranes are included.

    None of the options includes pressure Tank. if Tank is needed with this system, please follow this links.

    MAX WATER PRODUCT FEATURES:

    • -1st Stage / 20" x 2.5" 5 Micron Polypropylene Sediment Filter. To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, dirt, and cloudiness from water. Replace every 6~12 months 104081
    • -2nd Stage / 20" x 2.5" T33 GAC Coconut Shell Carbon Filter. Gives your water a sweet taste & removes chlorine, pesticides, herbicides, bad taste & odors. Replace every 6~12 months or lasts 20,000 gallons 104084
    • 3rd Stage / 20" x 2.5" CTO Carbon Block Filter / 1 Micron High efficiencyTo remove small particles and carbon fines that may pass from the second stage & ensure 100% of chlorine removal, Nitrates, Herbicides, tastes, odor, chloramines, THM, and other Volatile Organic Compounds. Replace every 6~12 104083
    • 4th Stage / 200 GPD TFC Thin Film Membranes - remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic and inorganic, chemicals). Replace every 2 years.
    • 5th stage/ Post Inline GAC coconut shell Carbon filter size 10" x 2.5"Replace every 12 months or lasts 2500 gallons 104059

    Includes
    • Feed Water Adapter, 60mm 1/2" MIP x 1/2" FIP ,1/4" Branch Hole + Feed Water Ball Valve 3/8 Tube x 1/4" MIP 105142 + 105156
    • Check Valve 1/4"ODx1/8" MIP 105115
    • 5 meter 1/4" PE Tube 105173
    • Housing Wrench 105170
    • Drain Clamp ( Drain saddle valve )105165
    • Manual Flush Valve, 1/4" Quick Tube OD x 1/4" NPTF. 105123
    • The Booster Pump kit included a booster pump + DC 24 V Transformer + High-pressure switch (shut off switch) and solenoid Valve.

    TDS = Total Dissolved Solids.

    Filter Replacement Options and Alternatives for Item Number:101130

    Spun Polypropylene Sediment Filter 5 Micron, size 20
    Average Rating(1)
    Sale
    28.00  22.00
    Part Number: 104081
    In Stock
    GAC UDF GAC Coconut Shell Carbon Filter, 20
    Sale
    50.00  40.00
    Part Number: 104084
    In Stock
    CTO Carbon Block Filter, 20
    Sale
    55.00  39.00
    Part Number: 104083
    In Stock
    200 GPD reverse osmosis Membrane  Water filter
    98.00
    Part Number: 104097
    In Stock
     
     

    Recently Viewed Items

    Logo