5 Stage 50 GPD Home Drinking Reverse Osmosis System
5-Stage Reverse Osmosis System with White Housings
Enjoy clean, fresh-tasting drinking water every day with the Max Water 5-Stage Reverse Osmosis System. Designed for residential use, this system combines sediment filtration, activated carbon filtration, reverse osmosis, and final taste polishing to improve water clarity, taste, and odour.
The high-efficiency RO membrane can reduce approximately 95% to 97% of TDS = Total Dissolved Solids. under suitable operating conditions. The five filtration stages work together to reduce sediment, chlorine, dissolved minerals, and other common impurities before delivering polished drinking water to the included faucet.
Durable white pre-filter housings provide a clean appearance and help protect the filter cartridges from light exposure. The compact frame is designed for standard residential under-sink installation.
Booster-Pump Recommendation: For membrane capacities of 150 GPD or higher, we strongly recommend adding a booster pump to help the system achieve its rated output. Actual production depends on feed-water pressure, temperature, water quality, and membrane condition.
Stages of Filtration
- Stage 1: 5-micron polypropylene sediment filter Part No. 104002
- Stage 2: Granular activated carbon (GAC) filter Part No. 104004
- Stage 3: 5-micron carbon block (CTO) filter Part No. 104005
- Stage 4: Thin-film composite RO membrane Part No. 104092
- Stage 5: Inline T33 coconut-shell GAC post-filter Part No. 104041
Included Components
- 5-stage RO unit with white pre-filter housings
- Selected RO membrane (price varies by selection)
- Selected drinking-water faucet (price varies by selection)
- One set of pre-installed filters
- 3.2-gallon RO storage tank
- Filter-housing wrench
- Standard installation accessory pack
- Optional booster pump, when selected (additional cost)
Specifications
- Approximate TDS reduction: 95% to 97% after the RO membrane stage
- Approximate product-to-waste-water ratio: 1:2
- Physical dimensions:
- RO unit: 15 in. L × 6 in. D × 17 in. H
- Storage tank: 11 in. diameter × 14 in. high
- Approximate total weight: 25 lb.
- Operating-water temperature: 40–104°F, maximum 40°C
- Recommended operating pressure: 45–80 PSI
Low-Pressure Installation: If the incoming water pressure is below 45 PSI, add a booster pump and a high-pressure shut-off switch.
High-Pressure Installation: If the incoming water pressure exceeds 80 PSI, install a pressure regulator and adjust the pressure to approximately 60–65 PSI.
Warning: This system is intended only for use with a microbiologically safe water supply. Do not use it to treat water of unknown biological quality without suitable disinfection before or after the system.
Filter Replacement: Under normal residential conditions, sediment and carbon filters should generally be replaced every 6–12 months. Actual filter life depends on water quality, water usage, and local operating conditions.
Performance Notice: Membrane output, TDS reduction, and waste-water ratios are approximate and may vary depending on feed-water pressure, temperature, pH, TDS, contaminant concentration, membrane model, membrane age, and installation conditions.
TDS = Total Dissolved Solids.
Filter Replacement Options and Alternatives for Item Number:101009
(1)
(4)
